.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear 
Purpose built to create the most amount of light from the smallest, most low-profile, housing possible, our DRL Visibility Pods are unbelievably bright but will practically disappear once installed. The white and amber pods are compatible with a variety of mounting kits that enable the lights to be used as DRLs, turn signals and backup lights. Choose between an offset mount, fender mount, or flush mount.
Complete with an integrated dual intensity circuit, the lights can be wired to run at full intensity, half intensity or automatically switch between the two with your vehicle's original high beam switch or turn signal switch.
Like emergency strobe lights, our DRL optics are designed to concentrate the light at the source as opposed to project it down the road. While ideal for daytime and nighttime conspicuity, these lights will also through a noticeable spread of fill lighting at night on the immediate road ahead.
Using the included wiring adapter, the DRLs can be directly plug-and-play connected to a CANsmart Accessory Controller or to any DENALI 2.0-series wiring harness. When connected to a DENALI 2.0 harness, the DRLs will run only in high-intensity mode. But when connected through the CANsmart, the DRLs can be fully dimmed.
What's In The Box?
Complete with an integrated dual intensity circuit, the lights can be wired to run at full intensity, half intensity or automatically switch between the two with your vehicle's original high beam switch or turn signal switch.
Like emergency strobe lights, our DRL optics are designed to concentrate the light at the source as opposed to project it down the road. While ideal for daytime and nighttime conspicuity, these lights will also through a noticeable spread of fill lighting at night on the immediate road ahead.
Using the included wiring adapter, the DRLs can be directly plug-and-play connected to a CANsmart Accessory Controller or to any DENALI 2.0-series wiring harness. When connected to a DENALI 2.0 harness, the DRLs will run only in high-intensity mode. But when connected through the CANsmart, the DRLs can be fully dimmed.
What's In The Box?
- (x1) DENALI DRL Visibility Pod
- (x1) Wiring Pigtail
- (x1) Wiring Adapter for DENALI CANsmart or 2.0 Series Lighting Harness
- (x3) Posi-Tap Connectors
- Dual Circuit: Running and brake
- 180 degree viewing angle
- Six high power LEDs
- Low 6 watt power consumption
- Low profile design
- Easy to connect to vehicle brake circuit
- Power Draw: 0.5 Amp
- Voltage: 12V DC
- Size: 4.4" x 1.1" x 0.42"
- Weight: 0.15 lbs
- Raw Lumens: 870
- IP67 Waterproof
- For Instructions Installation Guide
Proposition 65
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
You're seeing this because you're logged into an employee account or you're accessing the site through an internal
IP address. This information is not normally visible.
Things
| Sale price | None |
| Wholesale price | $60.29 |
| Shipping |
Weight: 1.00 Length: 1 Width: 2 Height: 5 |
| Product Added At | Wednesday 22 June, 2022 |
| Product Modified At | Monday 05 May, 2025 |
| Imported By | ETLOverride |
| Last Edited By | zycastle29@gmail.com |
| View In Admin |
Vendors
Some placeholder content for the collapse component. This panel is hidden by default but revealed
when the user activates the relevant trigger.
| Vendor | Inv | Cost | Retail | Jobber | MAP | Core | Updated | |||
|---|---|---|---|---|---|---|---|---|---|---|
| BWI | $51.09 | $89.05 | ? | $72.99 | ? | 2025-05-05 16:00:30 |
Check out these other great products
Error: Failed to add product
Please refresh the page and try again.