
RideTech RidePro-HP Ride Height Sensors for Enhanced Air Suspension
Upgrade your vehicle's air suspension system with the RideTech RidePro-HP Ride Height Sensors, specifically designed for those who demand precision and performance. This advanced system seamlessly integrates with the existing RidePro-X pressure-based setup, providing an unmatched combination of pressure and ride height measurement for your vehicle.
Why Choose RidePro-HP?
The RidePro-HP system is engineered to ensure optimal ride height and spring balance by comparing the position of the ride height sensors with the air pressure in each air spring. This means your vehicle stays level without any cross-loading, which is crucial during dynamic driving situations, such as high-performance maneuvers, sudden directional shifts, and emergency stops.
Key Features
- Compatible with RidePRO-X for ultimate pressure and height accuracy.
- Heavy-duty ride height sensors constructed with durable stainless steel arms.
- Sensor arms equipped with six linkage rod holes for easy motion ratio adjustments—no drilling required.
- Full 360-degree rotation of ride height sensors to prevent over-travel damage.
- Bendable linkage rods with rubberized ends for maximum articulation and longevity.
- Weatherproof connectors and wiring harnesses ensure reliable performance in all conditions.
- Can easily be added to existing pressure-only system installations.
Specifications
The complete RidePro-HP kit includes:
- 4 ride height sensors with stainless steel arms
- 4 ride height sensor linkage kits with bendable rods and rubber ends
- Group harness
- 1/4" sensor bolts with Nyloc nuts and flat washers
- Mounting tabs
- Heat shrink tubes
- Installation guide
Customer Feedback
Users have reported significant improvements in handling and stability after installing the RidePro-HP sensors. Many have noted the ease of installation and the precision it brings to their driving experience. Whether navigating tight corners or accelerating quickly, the enhanced control and responsiveness make every drive a pleasure.
Fitment
The RidePro-HP is designed to fit a variety of vehicles equipped with the RidePro-X system, making it a versatile choice for car enthusiasts looking to upgrade their air suspension setup.
Other Part Numbers:
RideTech #rid30400035
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
Ridetech manufactures exciting suspension systems that improve the handling and ride quality of your muscle car, truck, Corvette, or hot rod. From restorations and show cars, to high-speed autocross and track day cars, Ridetech offers a wide range of premium products including air suspension systems (air ride), coil-overs, shock absorbers, coil, and leaf springs, tubular control arms, roll bars, sway bars and much more.
Being a Hot Rodder is more than parts and problem solving, if you are one too, then you already know what we mean. It is a lifestyle and a passion, and it is built on sharing with friends. Being a Hot Rodder means you never enter any town as a stranger, you always have fellow enthusiast to sit down with and feel at home. This is why we spend so much of our time and resources on attending events, we want to meet you and hear about your story – even if you aren’t a customer, even if you buy someone else’s product…
Our approach to problem-solving, “can-do” perspective and relationship-driven business tactics have provided openings into many areas of business including agriculture, commercial transport, and defense projects as well… but at the core, we remain true to who we are – we are Hot Rodders.
TechnologyRideTech greatly improves the ride quality and handling performance of your late model muscle car. Choose coil-over suspension, air suspension or monotube shock absorber upgrades. RideTech’s engineering team starts from the ground up with impact forged aluminum shock absorbers bodies that are vastly superior, with respect to quality, to anything offered from the factory. As such, RideTech offers an unbeatable 1,000,001 mile warranty. Like high-end exotics and race cars, RideTech shocks are monotubes. The design provides precision rebound and compression control as well as enhanced reliability.
Coil-overs are popular upgrades for Mustangs Camaros and LX muscle. A Coilover is simply a shock surrounded by a coil spring; it places the shock and coil in one linear unit. A Coilover is a simple solution for most suspension designs, but can often be difficult to understand what you need. Fortunately, RideTech has your back with 21 years of suspension development.
Choosing a coil-over begins with two important decisions. The first is choosing the function of your vehicle. If you are building a performance car, then you will want a coil-over that has an adjustable shock. This allows the driver to tweak the “stiffness” of the suspension with a twist of a knob located on the shock. This adjustment knob controls the shock valving which controls the damping of the coil-over. This is a huge benefit for drivers who want to fine-tune their performance for the track, autocross, or the road.
The second most important decision in choosing a coil-over is finding your desired spring rate for the coil spring. Spring rate is the force required to compress a spring 1″ and is an important factor in how comfortable your car rides and your ride height. RideTech has worked out ideal spring rates for your vehicle and intended driving style.
Product LineRideTech offers a wide range of products for street rods and one-off custom cars with fabricated chassis including coil-over suspension, air suspension, and shocks. The world's greatest custom car builders choose RideTech suspension for exceptional handling and ride quality.
Complete Air Suspension, Coil-over Kits, and Conventional Streetgrip Suspension System for your classic muscle car and cruiser.
RideTech offers high-performance suspension components for all generations of Corvettes including coil-over conversions, shock upgrades, sway bars, and even MagneTuner, a plug N play controller for Magneride-equipped C7 Corvettes. A RideTech exclusive, our Track1 line of ultra-high-performance suspension components for C2/C3 Corvettes are proven race winners. The Track 1 line includes extreme duty IRS components as well as upgraded spindles with C7 Corvette bearing packs. Everything is designed to work with stock Corvette frames.
Vivid Racing carries high-performance parts for almost any need. Click these links to choose from our selection of Body Kits, Big Brake Kits, Seats, Custom Wheels and Tires, Engine Parts, Exhaust Parts, Intakes, Suspension, and Transmission Parts.
Buying from Vivid Racing is the best choice you can make. We back every part we sell with our guarantee of satisfaction.
Buy online or give one of our world-class sales professionals a call at 1-480-966-3040. If you don't see what you are looking for, Call Us.
We can help. Vivid Racing was voted #1 in customer service nationwide!
Hands-On Experience and Professionalism is what makes us the best.
LOOKING FOR OEM PARTS? We can help.
Are you tired of paying overly inflated prices that the dealers charge for their parts? Vivid Racing can save you up to 60% off the dealers' prices. Click here to visit our OEM PARTS STORE.
Sale price | None |
Wholesale price | $508.88 |
Shipping |
Weight: 12.00 Length: 27 Width: 13 Height: 7 |
Product Added At | Saturday 22 January, 2022 |
Product Modified At | Monday 16 June, 2025 |
Imported By | ETLOverride |
Last Edited By | kathi@vividracing.com |
View In Admin |
Carb Approved | - |
---|---|
Carb Number | - |
Epa Status | N/A |
Prop65 | Yes |
Carb Required | - |
Vendor | Inv | Cost | Retail | Jobber | MAP | Core | Updated | |||
---|---|---|---|---|---|---|---|---|---|---|
Sport Truck USA | $431.25 | $575.00 | ? | $575.00 | ? | 2025-06-16 11:56:58 |
Check out these other great products
