.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear 
This series of trusses not only builds on our experience as the world leader in axle truss design, it brings it to a whole new level of cost savings, strength, weight savings, simplicity of installation, precision fitment, and complete axle protection never before seen in the industry.
The key feature that sets the Apex truss apart is its unique peaked shape top which provides extra rigidity to the whole truss while allowing both a reduction in weight (vs using a thicker material top) and eliminating long weld seams. Previous versions with long weld seams can lead to extra weld warping of the axle, longer install times and can be inconsistent.
This peaked structure not only applies to the axle tube between the coil perches but extends underneath the coil perches as well, forming a complete truss from end to end of axle, an industry first in an OEM axle application. The JK Apex Truss that was secretly tested for over a year and a half proving that even though the truss is lighter weight, the peaked structure of the truss holds up to both extreme applications and daily driving.
The new JK Apex Front Axle Truss is the epitome of low cost, easy and quick to weld, simple, strong, and complete solutions for making your factory Jeep axle take more abuse than originally intended. You want easy insurance for your axle? The JK Apex Truss provides it.
Features:
- Patent Pending Apex truss peaked top design provides more rigidity than a flat top truss design
- Truss is CNC Precision Laser cut in-house from 1/8 inch mild steel for a lightweight yet strong solution...only 7 lbs
- Truss is CNC Precision Bent in-house for a great fitment. Literally drop the truss in place on the axle and it's ready to weld. No puzzle piece assembling
- Designed used 3D models directly from Dana Corp and Jeep for not only an amazing fit but clearances with surrounding components
- 70 percent less welding needed than previous truss designs means less warping, faster turnaround, and lower costs
- All long seams are bent so you don't need to spend time welding them together
- Apex design continues under the OEM coil buckets for complete end-to-end axle reinforcement...an industry first
- Dimpled holes provide not only weight reduction but rigidity and strength
- Contours to the cast steel differential and can be welded with normal MIG welder and moderate pre-heating and post-heating
- Provides worry-free wheeling of up to 37 inch tires on stock JK axles
- Truss strengthens the weakest sections of the axle...under the coil perches, around the control arm brackets, and where the tube enters the casting
- Low Profile Design doesn't go over differential and allows usage in vehicles with only slight lift
- Differential: Dana 30
- Sold As: Each
Features:
- Some grinding and fitment may be required when installing this kit. Every axle varies slightly and some fabrication may be required.
- Stock axles have other components that may not hold up to the abuse of larger tires. Artec implies no guarantees that you will not break some component on your stock axles using larger tires. Use at you own risk.
- In rare and extreme cases, the truss may come into contact with oil pan. Prior to operating the vehicle, remove the coil springs, cycle the suspension including full compression of both sides simultaneously and add bumpstop extensions to prevent damage to oil pan.
- This kit is intended for vehicles with at least minor lifts (2.0 Inch and up recommended) and at least 1/2 inch bump stop extensions. Check clearances before installing. Not tested in non-US JKs or right hand drive axles.
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
Artec Industries is a company that was founded in 2003 in Tucson, Arizona, and is known as Artec Welding back then. The company started when the company's president Artie Nuttall bought a 1987 4Runner to join his wife's family offroad excursion.
As a talented welder himself, he started welding structural and decorative projects for various high-end commercial and residential projects. But his passion for offroading has never left him.
So in 2010, Artec Welding was rebranded as Artec Industries and started developing products for the automotive industry.
From Building Houses To Building Offroad PartsThe company used its experience in welding to create some of the best offroad parts available in the market today. They offer parts such as ultimate high steer arms, quart crates, but they are better known for their axle swap kits and axle trusses.
Continuous Company GrowthAs more people patronize their products, there is a need for Artec to relocate to a bigger facility to accommodate their customers' growing demand. From a small garage, the company is now situated in a large facility in Salt Lake City, Utah, which is a strategic location that allows them to distribute their products more efficiently.
Purchase Artec Industries Products At Vivid RacingIf you are in the market for quality offroad parts, Artec Industries is the brand. Each part is carefully manufactured by the country's most talented craftsmen. It guarantees that you get the best product every time. To know more about Artec, visit Vivid Racing and check out their list of products that fit your specific need.
| Sale price | None |
| Wholesale price | $115.19 |
| Shipping |
Weight: 7.50 Length: 15 Width: 5 Height: 5 |
| Product Added At | Wednesday 05 February, 2020 |
| Product Modified At | Thursday 10 July, 2025 |
| Imported By | ETLOverride |
| Last Edited By | vendordata@vividracing.com |
| View In Admin |
| Vendor | Inv | Cost | Retail | Jobber | MAP | Core | Updated | |||
|---|---|---|---|---|---|---|---|---|---|---|
| Meyer Distributing | $97.62 | $120.99 | $120.99 | $120.99 | ? | 2025-07-10 20:54:50 |
