.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear 
BMR Suspension Polyurethane Rear Suspension Kit
Enhance Your Ride with Precision Engineering
If you're looking to amp up your 1968-1972 GM A-body's performance, the BMR Suspension Polyurethane Rear Suspension Kit is the perfect upgrade. Designed specifically for models like the Buick Skylark, Chevrolet Chevelle, Oldsmobile Cutlass, and Pontiac LeMans, this kit helps you launch harder, reduces wheel hop, and adds cornering consistency, all while maintaining a comfortable ride.
Why Choose BMR Suspension?
The stock stamped steel control arms with soft rubber bushings tend to flex under load, absorbing power instead of transferring it to your tires. With BMR’s non-adjustable rear suspension kit, you get upper and lower control arms made from heavy-duty materials that are built to last. The lower control arms are crafted from robust 1x3-inch, 0.20120-inch wall rectangular steel tubing, ensuring they can handle any performance application you throw at them. Meanwhile, the upper control arms use 1.625-inch diameter, 0.20120-inch wall DOM steel tubing, providing the strength needed for high compression loads.
Key Features
- Fits 1968-1972 GM A-bodies
- Non-adjustable design for simplicity
- 95-durometer internally fluted polyurethane greasable bushings
- Zinc-coated inner sleeves for durability
- DOM steel tubing for superior strength
- 1.625-inch diameter, 0.20120-inch wall tubing for upper control arms
- 1.5x3-inch, 0.20120-inch wall rectangular tubing for lower control arms
- Dramatically reduces control arm flex
- Greatly reduces bushing deflection
- Improved performance with acceptable NVH (Noise, Vibration, Harshness) levels
- Designed for street performance, drag racing, and road racing
- Available in durable black hammertone or red powdercoat finishes
- Installation time of approximately 3-4 hours
- Proudly designed and made in the U.S.A.
Fitment
- Buick Grand Sport | Skylark 1968-1972
- Chevrolet El Camino | Chevelle | Malibu | Monte Carlo 1968-1972
- Oldsmobile Cutlass | 442 1968-1972
- Pontiac LeMans | GTO 1968-1972
Installation Instructions
Ready to install? For detailed installation instructions, click here.
Customer Feedback
Users rave about the BMR Suspension Rear Suspension Kit, noting significant improvements in traction and handling. Many have reported a noticeable reduction in wheel hop during hard launches, making it a favorite among both street enthusiasts and racers alike. The bushing quality has also received high praise, with customers appreciating the smooth operation and durability.
Frequently Asked Questions
1. Is this kit easy to install?
Yes, the installation time is about 3-4 hours, and detailed instructions are provided to guide you through the process.
2. Will this kit improve my car's handling?
Absolutely! The BMR kit dramatically reduces control arm flex and bushing deflection, leading to improved performance and handling on the road or track.
3. What materials are used in the construction?
The kit features heavy-duty DOM steel tubing and 95-durometer polyurethane bushings, ensuring durability and performance under load.
4. Can I use this kit for racing?
Yes, it's designed for street performance, drag racing, and road racing applications, making it versatile for various driving styles.
5. What color options are available?
You can choose between a sleek black hammertone finish or a vibrant red powdercoat, both designed to last and look great on your vehicle.
Upgrade your ride with the BMR Suspension Polyurethane Rear Suspension Kit and experience the difference in performance and handling!
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
When it comes to upgrading cars, the first thing that comes into a driver’s mind is either the engine performance or how the vehicle looks. But what some new car enthusiasts do not know is that by upgrading your vehicle’s suspension, you can have both goals in one go. By upgrading your vehicle’s suspension, you can improve the way it handles, which means better turning capability, and improve its stance giving it a more aggressive look.
BMR Suspension is a brand you can trust when it comes to quality suspension products.
How It StartedBMR Suspension is an aftermarket company that specializes in creating suspension parts for various American muscle cars. The company started in 1998 and has since provided enthusiasts with an affordable option for aftermarket suspension parts.
They may not be as old as some of the tenured suspension manufacturers in the world, but the company does not fall short when it comes to delivering quality products to its customers. Today, they have become the go-to brand for suspension upgrades and have a comprehensive list of parts for a wide range of vehicle applications.
Proudly Made in the USABMR products are 100% made in the USA at their manufacturing facility in Tampa, Florida. They use high-quality Chromoly steel, which is strong and durable. These are the same materials used in the roll cages of race cars.
All of BMR’s products are fixture-welded to avoid any deformation, ensuring that all the end products are within specification. Since their manufacturing process is done in-house, the company is able to maintain its level of quality. Because of this, BMR Suspension has become one of the most go-to brands for enthusiasts who want the best.
Real-World TestingBMR designs do not only look good on paper but produce actual performance gain. With dozens of project cars fitted with their product, all have shown remarkable improvement in terms of vehicle performance, may it be on the street-driven car or a full-blown drag car.
Purchase BMR products at Vivid RacingYour vehicle’s suspension plays a significant role in your car’s performance and should not be overlooked. Hence, it is a must that you upgrade your suspension.
For those who want to push their vehicle more, BMR is a company that can help you with it. BMR has got your every need covered with various suspension parts like control arms, links, bushings, and more. To know more about the company and what they can offer, visit Vivid Racing and check what the company has in store for you.
BMR product applications are warranted to be free from defects in material and workmanship under normal use and service for a period of (2) two years from the date of sale to the original purchaser. Obligation under this warranty is limited to product replacement but not the reinstallation of the replacement product or other incidental costs. This warranty does not cover any product that has been subject to misuse, neglect, alteration, accident, or improper installation. Normal wear shall not be considered a defect under this warranty. All warranty adjustments are limited to replacement or credit of returned merchandise. This warranty specifically excludes impact damage or damage to powdercoat. BMR will issue a Returned Material Authorization number for every return. Returned goods will not be accepted without an RMA Number. BMR will ship the replacement product at no charge using UPS Ground. If the customer would like to upgrade the shipping method (for example, Next Day Air), the customer will be charged the difference in shipping cost.
BMR product is designed to be used with OEM product and other BMR products. BMR does not warranty our product for fitment with aftermarket product from other manufacturers. This applies to suspension products from other manufacturers as well as aftermarket exhaust products, aftermarket drivetrain products, and other aftermarket products. BMR products that are returned due to fitment issues with OEM components or BMR product will receive a full refund. BMR products that are returned due to fitment issues with aftermarket product will be subject to a 15% restocking fee.
Purchaser understands and recognizes that racing parts, equipment and services by or manufactured and/or sold by BMR, are subject to varied conditions due to the manner in which they are to be installed and used. The acceptability and suitability of any part sold or manufactured by BMR for a particular application is solely the purchaser's decision. BMR makes no warranties whatsoever, expressed, implied or written, THERE IS NO WARRANTY OF MERCHANTABILITY. The right to make changes in the design or add to or improve on their product without incurring any obligation to install the same on products previously manufactured is expressly reserved. Buyer agrees to indemnify and hold Seller harmless from any claim, action or demand arising out of or incident to Buyer's installation or use of products purchased from BMR.
| Sale price | None |
| Wholesale price | $238.91 |
| Shipping |
Weight: 23.00 Length: 26 Width: 10 Height: 4 |
| Product Added At | Tuesday 05 May, 2020 |
| Product Modified At | Wednesday 28 May, 2025 |
| Imported By | ETLOverride |
| Last Edited By | kathi@vividracing.com |
| View In Admin |
| Carb Approved | - |
|---|---|
| Carb Number | - |
| Epa Status | N/A |
| Prop65 | Unknown |
| Carb Required | - |
| Vendor | Inv | Cost | Retail | Jobber | MAP | Core | Updated | |||
|---|---|---|---|---|---|---|---|---|---|---|
| BMR Suspension | $202.46 | $269.95 | ? | ? | ? | 2025-05-28 12:31:33 |
