See all Suspension products
Product thumb
Camburg 1.25 Uniball UCA Replacement Kit Toyota | Lexus | Ford 2003-2022
$134.00
This kit is what's required to rebuild the uniballs in your Camburg upper arms and some of our lower arms. The kit includes two FK 1.25 uniballs and two snap rings. These are made in the USA and are not some cheap imported parts. They have a self-lubricating military grade PTFE liner internally for reduced stiction and noise. Having a 100,730 lbs. load rating, these are far stronger than OEM style ball-joints and cheaper or smaller uniball bearings. The bearing ID with the mis-alignment spacers removed is 1.25" and the bearing OD is 2.375".

What's Included:
  • FK COMH-20T 1.25" uniballs (2)
  • 1.25" uniball snap rings (2)
Install Instructions:Fitment:
  • Chevrolet/GMC 2500/3500 HD 2001-2022
  • Chevrolet/GMC Colorado/Canyon 2015-2025
  • Chevrolet/GMC Silverado/Sierra 1500 2007-2022
  • Chevrolet/GMC Tahoe/Yukon 2007-2020
  • Dodge/RAM Ram 1500 (DS) 2009-2021
  • Ford Bronco 2021-2022
  • Ford F-150 2004-2022
  • Ford Ranger 2019-2022
  • Ford Raptor 2010-2022
  • Lexus GX460 2010-2022
  • Lexus GX470 2003-2009
  • Lexus LX600 2022
  • Toyota 4-Runner 2003-2022
  • Toyota FJ Cruiser 2007-2014
  • Toyota Hilux 2005-2018
  • Toyota Land Cruiser 200 2008-2021
  • Toyota Prado 120/150 2003-2018
  • Toyota Tacoma 2005-2022
Note:
  • Confirm sizing before ordering as some older version upper arms use a smaller 1.00" uniball. Easiest way to tell is by the bolt. If the bolt is a hex head and above the uniball, than it's a 1" uniball as the 1.25" has the bolt recessed below.
Proposition 65

WARNING: Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov

You're seeing this because you're logged into an employee account or you're accessing the site through an internal IP address. This information is not normally visible.
Things
Sale price None
Wholesale price $126.50
Shipping Weight: 1.00
Length: ?
Width: ?
Height: ?
Product Added At Tuesday 11 October, 2022
Product Modified At Tuesday 01 July, 2025
Imported By ETLOverride
Last Edited By jaywilson85@gmail.com
View In Admin

Emissions Info
Carb Approved -
Carb Number -
Epa Status N/A
Prop65 No
Carb Required -
Vendors
Some placeholder content for the collapse component. This panel is hidden by default but revealed when the user activates the relevant trigger.
Vendor Inv Cost Retail Jobber MAP Core Updated
CAMBURG ENGINEERING INC $107.20 $134.00 $134.00 $134.00 ? 2025-07-01 11:05:17


Check out these other great products