1-480-966-3040
Mon-Fri 8am to 5pm AZ
Loading...
In this high end Camburg Long Travel kit you will find nothing but the very best in A-Arm performance. Starting with our lower arm, uni-balls in the lower frame pivots, uni-ball lower ball joint replacement, and a stout boxed race arm. The upper arm pivots on urethane bushings with zerk fitting and 1.25" uniballs replace the stock ball joints. We adapt the uniball to the spindle with heat treated stainless steel adapters. Utilizing Camburg SPEC 8" travel 2.5" reservoir coilovers by FOX or King there is no need to cut the stock coil-over mounts. The shock design has an external top cap so the shock has a shorter overall extend length then all other off-road race shocks. The steering upgrade includes heat treated stainless steel tie-rod and inner clevis which utilizes a FK 3/4" heim joint. This system will yield up to 15" travel on a 2x4 and 14" on a 4x4. This system can also be upgraded with our weld-on bypass shock mount and a custom FOX or King 2.5" 3 tube bypass shock.
With this kit you have the ability to run a coilover, with a bypass shock and/or hydraulic/air bump stop for the ultimate control for off-road use. We have a Camburg spec. FOX or King 2.5 coilover that we've designed to yield maximum useable wheel travel and control with specific valving. For bypass shock setups give us a call or send an email for pricing.
Fiberglass front fenders need to be installed in conjunction with this suspension system. While this kit is able to be 95% bolt-on, we recommend having it installed by a reputable off-road shop familiar with these types of products and components. This is not for your beginner mechanic to handle.
What's Included:
With this kit you have the ability to run a coilover, with a bypass shock and/or hydraulic/air bump stop for the ultimate control for off-road use. We have a Camburg spec. FOX or King 2.5 coilover that we've designed to yield maximum useable wheel travel and control with specific valving. For bypass shock setups give us a call or send an email for pricing.
Fiberglass front fenders need to be installed in conjunction with this suspension system. While this kit is able to be 95% bolt-on, we recommend having it installed by a reputable off-road shop familiar with these types of products and components. This is not for your beginner mechanic to handle.
What's Included:
- Tubular 1.25 uniball upper control arms
- Boxed uniball lower control arms
- Lower 1.25 uniball spindle adapters
- Steering extensions
- Extended front brake lines
- 12" limit straps
- Upper coilover shock mounts
- Hardware
- Toyota Tacoma 2WD | 4WD 2016-2023
- 2wd models are able to run a coilover, bypass shock and air bump stop
- 4wd models can run a coilover and air bump stop or coilover and bypass shock, not all 3 like the Prerunner model
- Fiberglass front fenders are required
- Specific L/T kit coilovers at minimum are required to install this kit and L/T axles on 4wd trucks
Proposition 65
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
You're seeing this because you're logged into an employee account or you're accessing the site through an internal
IP address. This information is not normally visible.
Things
Sale price | None |
Wholesale price | $3,941.20 |
Shipping |
Weight: 25.00 Length: ? Width: ? Height: ? |
Product Added At | Wednesday 18 October, 2023 |
Product Modified At | Tuesday 01 July, 2025 |
Imported By | ETLOverride |
Last Edited By | jaywilson85@gmail.com |
View In Admin |
Vendors
Some placeholder content for the collapse component. This panel is hidden by default but revealed
when the user activates the relevant trigger.
Vendor | Inv | Cost | Retail | Jobber | MAP | Core | Updated | |||
---|---|---|---|---|---|---|---|---|---|---|
CAMBURG ENGINEERING INC | $3,340.00 | $4,175.00 | $4,175.00 | $4,175.00 | ? | 2025-07-01 11:05:31 |
Check out these other great products

Error: Failed to add product
Please refresh the page and try again.