.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear 
Rounding out 2020, we updated our Camburg performance ball-joint upper arms to use our NEW Camburg X-Joint pre-installed along with our billet cap kit. The arms are ready to bolt up out of the box.
We developed the new Camburg X-Joint as an extreme performance, all-weather, all conditions, high angle ball-joint for our Camburg performance BJ upper control arms. These are much higher quality, considerably stronger and have an improved boot design that allows for higher angle use, better greasing and increased longevity. With higher strength heat-treated materials and an improved design, we were able to vastly improve upon what was available on the market. These are fully sealed and perfect for extreme conditions, so dirt, sand, rain, mud and snow are no match for them. The dual lip seal design on the boot insures the outside elements don't make their way in and contaminate the grease and joint.
The grease zerk fitting allows you to grease them on the truck without having to remove the boot. Our Camburg X-Joint is designed specifically for our ball-joint upper arms for optimum fit and maximum wheel travel.
These arms gives many of the same benefits our uniball upper arms offer at a lower cost. The ball-joint arms also hold up better under wet harsh conditions compared to a uniball since it's a sealed & greased joint. By building an upper arm to re-angle the ball-joint, you're able to gain more wheel travel with extended length coilovers from Bilstein, FOX, King and Icon and keep the joint in its normal operating range. These arms also correct the suspension geometry by increasing much needed caster compared to stock arms which improves handling and allows for a wider range of alignment adjustment. The tubular construction also gives you more tire & shock clearance compared to the weaker stock stamped sheet metal arm.
What's Included:
We developed the new Camburg X-Joint as an extreme performance, all-weather, all conditions, high angle ball-joint for our Camburg performance BJ upper control arms. These are much higher quality, considerably stronger and have an improved boot design that allows for higher angle use, better greasing and increased longevity. With higher strength heat-treated materials and an improved design, we were able to vastly improve upon what was available on the market. These are fully sealed and perfect for extreme conditions, so dirt, sand, rain, mud and snow are no match for them. The dual lip seal design on the boot insures the outside elements don't make their way in and contaminate the grease and joint.
The grease zerk fitting allows you to grease them on the truck without having to remove the boot. Our Camburg X-Joint is designed specifically for our ball-joint upper arms for optimum fit and maximum wheel travel.
These arms gives many of the same benefits our uniball upper arms offer at a lower cost. The ball-joint arms also hold up better under wet harsh conditions compared to a uniball since it's a sealed & greased joint. By building an upper arm to re-angle the ball-joint, you're able to gain more wheel travel with extended length coilovers from Bilstein, FOX, King and Icon and keep the joint in its normal operating range. These arms also correct the suspension geometry by increasing much needed caster compared to stock arms which improves handling and allows for a wider range of alignment adjustment. The tubular construction also gives you more tire & shock clearance compared to the weaker stock stamped sheet metal arm.
What's Included:
- Upper Arms
- Hardware Kit
- Billet X-Joint Covers
- CNC bent tubes MIG welded
- Thicker .156" wall round tubing
- Polyurethane frame pivot bushings with grease-able zerk fittings
- Camburg X-Joints pre-installed
- Billet aluminum covers
- Matte black powder-coating
- All necessary hardware included and ready to install
- Made in the USA in-house
- Designed for 1-3" of lift
- Track Width: Stock
- Wheel Size: 17-20 in
- Max Backspacing: 6.00 in
- Tire Size: 33-35 in
- Toyota Tundra 2wd/4wd 2007-2021
- With so many variables of wheel size, offset/backspacing, tire size, brands and styles, the amount of lift and specific suspension components, etc., you may need to trim the plastic inner fenders and/or modify the body mount behind the front tires to eliminate tire rubbing.
- 20" OEM wheels & tires and 18" OEM wheels with larger tires than stock will not work with this suspension system "as is" and would require hub-centric wheel spacers.
Proposition 65
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
You're seeing this because you're logged into an employee account or you're accessing the site through an internal
IP address. This information is not normally visible.
Things
| Sale price | None |
| Wholesale price | $941.18 |
| Shipping |
Weight: 21.90 Length: 15 Width: 14 Height: 7 |
| Product Added At | Tuesday 11 October, 2022 |
| Product Modified At | Tuesday 01 July, 2025 |
| Imported By | ETLOverride |
| Last Edited By | jaywilson85@gmail.com |
| View In Admin |
Emissions Info
| Carb Approved | - |
|---|---|
| Carb Number | - |
| Epa Status | N/A |
| Prop65 | No |
| Carb Required | - |
Vendors
Some placeholder content for the collapse component. This panel is hidden by default but revealed
when the user activates the relevant trigger.
| Vendor | Inv | Cost | Retail | Jobber | MAP | Core | Updated | |||
|---|---|---|---|---|---|---|---|---|---|---|
| CAMBURG ENGINEERING INC | $797.61 | $1,595.33 | $1,450.34 | $1,009.00 | ? | 2025-07-01 11:05:24 |
Check out these other great products
Error: Failed to add product
Please refresh the page and try again.