.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear 
You can easily lift the rear of your Tundra with our 1.5 lift shackles. Not only are they longer than stock to give you the lift you're looking without stiffening the ride, but are built considerably stronger too. The stock shackles are just stamped out of thin metal and bolted together allowing for quite a bit of unwanted flex.
Our Camburg shackles are laser cut from thick 3/8" steel and have a welded in gusset bridging the side plates together to eliminate flex. We powdercoat them wrinkle black and supply new metric bolts and hardware to bolt right into the factory mounts. These measure 6" bolt to bolt center in length, the stock shackles measure 4". When using these with the stock leaf springs you may need to grind the serrated teeth on the leaf spring pivot sleeves so it slips into our shackle.
These shackles are also needed when running Deaver's K-37 or U-748 leaf spring packs as the stock shackle is too short in length.
When installing, have the M14 bolts with the lock nuts to the outside on both sides and you will re-use the upper sleeve in the frame pivot bushings. Orientate the shackle like pictured above so that the center gusset clears the frame as it swings back.
What's included:
Our Camburg shackles are laser cut from thick 3/8" steel and have a welded in gusset bridging the side plates together to eliminate flex. We powdercoat them wrinkle black and supply new metric bolts and hardware to bolt right into the factory mounts. These measure 6" bolt to bolt center in length, the stock shackles measure 4". When using these with the stock leaf springs you may need to grind the serrated teeth on the leaf spring pivot sleeves so it slips into our shackle.
These shackles are also needed when running Deaver's K-37 or U-748 leaf spring packs as the stock shackle is too short in length.
When installing, have the M14 bolts with the lock nuts to the outside on both sides and you will re-use the upper sleeve in the frame pivot bushings. Orientate the shackle like pictured above so that the center gusset clears the frame as it swings back.
What's included:
- 1 pair shackles
- M14 bolts and hardware
- Mig welded
- Internal gusset
- Extended length
- Increased wheel travel
- Smoother action and less deflection
- Toyota Tundra 2wd/4wd 2007-2021
Proposition 65
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
You're seeing this because you're logged into an employee account or you're accessing the site through an internal
IP address. This information is not normally visible.
Things
| Sale price | None |
| Wholesale price | $187.86 |
| Shipping |
Weight: 10.00 Length: ? Width: ? Height: ? |
| Product Added At | Tuesday 11 October, 2022 |
| Product Modified At | Tuesday 01 July, 2025 |
| Imported By | ETLOverride |
| Last Edited By | jaywilson85@gmail.com |
| View In Admin |
Emissions Info
| Carb Approved | - |
|---|---|
| Carb Number | - |
| Epa Status | N/A |
| Prop65 | No |
| Carb Required | - |
Vendors
Some placeholder content for the collapse component. This panel is hidden by default but revealed
when the user activates the relevant trigger.
| Vendor | Inv | Cost | Retail | Jobber | MAP | Core | Updated | |||
|---|---|---|---|---|---|---|---|---|---|---|
| CAMBURG ENGINEERING INC | $159.20 | $199.00 | $199.00 | $199.00 | ? | 2025-07-01 11:05:18 |
Check out these other great products
Error: Failed to add product
Please refresh the page and try again.