.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear 
These are the same uniball radius arms we use in our Baja and Trail Series kits for the Ford vans. By using a 1" FK uniball we're able to gain wheel travel and eliminate any flex or deflection you would have with a rubber or polyurethane bushing. The also last longer and allow the suspension to cycle smoother and bind free. We correct the suspension geometry by increasing positive caster for better handling and stability both on and off-road. We designed these to be used with 3-5" of lift from a coil spring or coilover.
We engineered these to be much stronger than the thin stock radius arms with stronger shock mounts that are double sheared and an additional tab we use for a limit strap to bolt to. We use thick walled DOM tubing, laser cut thick plate work top & bottom where they bolt to the i-beams along with boxing in the front and uniball areas for even more strength. These are powdercoated semi-gloss black and bolt right up once you remove the stock radius arms and brackets. These are perfect if you're a DIY'er doing something custom or upgrading your van with an off brand or pieced together suspension kit. There are many more components needed when using these, so if you're looking for something complete, look at our Baja or Trail kits.
What's included:
We engineered these to be much stronger than the thin stock radius arms with stronger shock mounts that are double sheared and an additional tab we use for a limit strap to bolt to. We use thick walled DOM tubing, laser cut thick plate work top & bottom where they bolt to the i-beams along with boxing in the front and uniball areas for even more strength. These are powdercoated semi-gloss black and bolt right up once you remove the stock radius arms and brackets. These are perfect if you're a DIY'er doing something custom or upgrading your van with an off brand or pieced together suspension kit. There are many more components needed when using these, so if you're looking for something complete, look at our Baja or Trail kits.
What's included:
- Driver-side uniball radius arm
- Passenger-side uniball radius arm
- Driver-side radius arm mounting bracket
- Passenger-side radius arm mounting bracket
- Uniball spacers and Grade 8 hardware
- Ford E-Series 150 Van 2wd 1997-2014
- There are many more components needed when using these, so if you're looking for something complete, look at our Baja or Trail kits.
- On some E-150's you may need to shim the top & bottom of the i-beam as the height is slightly shorter.
Proposition 65
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
You're seeing this because you're logged into an employee account or you're accessing the site through an internal
IP address. This information is not normally visible.
Things
| Sale price | None |
| Wholesale price | $1,505.68 |
| Shipping |
Weight: 78.00 Length: ? Width: ? Height: ? |
| Product Added At | Tuesday 11 October, 2022 |
| Product Modified At | Tuesday 01 July, 2025 |
| Imported By | ETLOverride |
| Last Edited By | jaywilson85@gmail.com |
| View In Admin |
Vendors
Some placeholder content for the collapse component. This panel is hidden by default but revealed
when the user activates the relevant trigger.
| Vendor | Inv | Cost | Retail | Jobber | MAP | Core | Updated | |||
|---|---|---|---|---|---|---|---|---|---|---|
| CAMBURG ENGINEERING INC | $1,276.00 | $1,595.00 | $1,595.00 | $1,595.00 | ? | 2025-07-01 11:05:24 |
Check out these other great products
Error: Failed to add product
Please refresh the page and try again.