
Built on the back of the race winning Monotube Remote Reservoir (MRR) shock absorbers, Dobinsons new range of MRR Adjustable shock absorbers combine the best in high performance race-bred Monotube technology, with an all new 3-way damping adjustment system to turn your 4x4 into the ultimate offroad machine. Each component of the MRR shock absorber has been refined and improved to offer a higher level of ride quality, vehicle control and shock absorber performance.
The new 6063 honed aluminium reservoir, revised light-weight floating piston, Carbon Fibre/PTFE/ Disulphide composite wear band, improved 3-stage sealing system and the ability to run lower gas pressure with the addition of the reservoir compression adjuster, have combined to provide massive reductions in shock absorber friction, resulting in an improved vehicle ride and damping performance. The revised sealing design now provides a 3 stage FKMHNBR shaft seal system that, when combined with the reduced operating frictions, provides a vastly increased service life with reduced wear.
The Micro-polished, hard chromed and heat treated shock shaft, revised CNC aluminium high flow race piston, and DOM Seamless tubing body provides the ultimate in performance and off-road durability. The 3-way adjustment design reduces the main piston working load, distributing heat more evenly between the main piston and the reservoir piston for reduced operating temperatures, and allows quick and easy damping changes for the ultimate in shock tunability in varying terrain and vehicle loads, to keep you controlled and comfortable.
Features:
- 3-way adjustable valving - adjust high speed, low speed compression and rebound
- Fully Rebuild-able Design and re-valvable
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- High oil capacity
- 60mm 6063 Aluminium Remote Reservoir
- Heavy Duty 3 Stage FKMHNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC Billet alloy piston 50mm bore - for the ultimate in offroad handling
- 66mm/2.2" Bodied Series
- Parker Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 22mm MicroPolished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low wear performance
- Direct Bolt-On Design
- High Quality O.E.M. Grade Natural Rubber Bushings
- Jeep Wrangler JL 2018-2023
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
Dobinson is a company that specializes in producing suspension parts, mainly leaf and coil springs setups, particularly those from SUVs or offroading vehicles. The company was established in 1953 and has been providing quality parts for more than 70 years.
Today, they have become one of the market leaders in Australia and is continuously growing by expanding its reach worldwide.
Dobinsons is considered the largest source of 4x4 suspension parts. Known for its quality and durability, it has become the brand of choice by enthusiasts who want to improve their suspension system. They have over 13000 spring specifications in their inventory, which are all designed through the use of the latest computerized software and technology. This allows them to produce professional and accurate end products.
Dobinson is located at a 4000 square meter facility that serves as their manufacturing hub and inventory warehouse. They offer a wide range of parts such as coil springs, torsion bars, leaf springs, Shackle kits, shock absorbers, U bolts, Centre bolts, polyurethane bushings, castor wedges, and other 4x4 accessories.
If you want to have a suspension system that could work well in any condition, may it be for daily driving or a weekend excursion off the road, then Dobinson is the right brand for you. Their products are designed to work better than stock and allow you to perform your offroading duties worry-free. With a variety of suspension parts to choose from, Dobinsons would have the right product for you. Visit Vivid Racing and check out the list of parts that would fit your specific needs and vehicles.
Coil Springs listed in this catalogue have a 2 year warranty against the following:
- Faulty Manufacture
- Breakage
- Sagging (being loss of free height of more than 10mm)
- Faulty Manufacture
- Breakage
- Sagging (being the loss of free camber by more than 12mm)
Fridges listed in the catalogue have a 5 year warranty on the motor and a 1 year warranty on all other parts against:
- Faulty Manufacture
- Faulty Manufacture
- Faulty Manufacture
Dobinsons Spring & Suspensionâ„¢ will not pay for costs incurred in forwarding or returning goods. This warranty does not cover and Dobinsons Spring & Suspensionâ„¢ makes no warranty with respect to; (1) any merchandise that is abused, misused, misapplied, neglected or altered; or that is improperly or incorrectly installed or maintained or used; or that is subjected to abnormal conditions of use, temperature, moisture, dirt or corrosive matter; (2) Goods bought for industrial, mining or agricultural use; (3) Goods no longer required by Client; (4) Goods incorrectly chosen by Client; (5) Goods modified or altered by client; and (6) any merchandise, materials, parts or other components supplied by someone other than Dobinsons Spring & Suspensionâ„¢.
Dobinsons Spring & Suspensionâ„¢ shall not be liable for any expenses incurred by Client in order to remedy any defect in its product. Dobinsons Spring & Suspensionâ„¢ shall not be liable for any consequential, special, indirect or contingent damage or expense arising Directly or Indirectly from any defect in its products or from use of any products.
Client agrees to indemnify and hold Dobinsons Spring & Suspensionâ„¢ harmless from and against any loss, injury or damage, to person or property, that extends beyond the warranties set forth above, whether the claims against Dobinsons Spring & Suspensionâ„¢ or the damages are incidental or consequential.
Installation of aftermarket items to your vehicle may adversely affect, void or violate the Manufacturers terms of warranty on your vehicle. Review the terms of your vehicle warranty prior to purchase and/or installation of any aftermarket part or accessory. Dobinsons Spring & Suspensionâ„¢ does not make any representations or warranties of any kind as to suitability or fitness for a particular vehicle or purpose. Dobinsons Spring & Suspensionâ„¢ shall not be responsible or liable for direct or indirect damages as a result of the purchase and/or installation of these aftermarket products.
For the Dobinson’s Warranty Form, please click here.
Sale price | None |
Wholesale price | $1,156.40 |
Shipping |
Weight: 15.00 Length: 32 Width: 9 Height: 6 |
Product Added At | Tuesday 03 January, 2023 |
Product Modified At | Wednesday 28 May, 2025 |
Imported By | ETLOverride |
Last Edited By | rosemarie_alagao@yahoo.com |
View In Admin |
Vendor | Inv | Cost | Retail | Jobber | MAP | Core | Updated | |||
---|---|---|---|---|---|---|---|---|---|---|
Dobinsons Spring & Suspension USA | $980.00 | $1,400.00 | ? | ? | ? | 2025-05-28 21:20:15 |
Check out these other great products
