See all Fuel Components products
Product thumb
Fleece Performance Auxiliary Heated Fuel Filter Kit Dodge Ram Cummins 2003-2018
$449.00
Introducing our all-new full featured auxiliary fuel filter kit for the 2003-2018 Dodge Cummins. This kit builds off our standard auxiliary kit with the addition of an integral high-flow fuel heating element and Water-In-Fuel (WIF) sensor. The kit includes everything you need to properly route, plumb and filter fuel for your Cummins engine from a Fleece Performance lift pump to the injection pump. Our kit improves accessibility to the fuel filter as well as reduces your ongoing maintenance cost with a lower cost Donaldson filter.

Kit includes:
  • Fuel filter base with integral heater and mounting hardware
  • Donaldson 3 micron fuel filter and water separator
  • Push Lock hose and all necessary AN and barb fittings
  • CP3 Feed fittings for 5.9L and 6.7L CP3 pumps
  • Water-In-Fuel (WIF) sensor and adaptation harness
Fuel heater specifications:
  • Temperature switching points: ON: 28.4F +/-5.4F, OFF: 48.2F +/- 5.4F
  • At typical fuel flow rates a temperature increase of between 4-8F will occur across the heating element
Install Instructions:Fitment:
  • Dodge Ram 2500/3500 5.9L 24V Cummins 2003-2007
  • Dodge Ram 2500/3500 6.7L 24V Cummins 2007.5-2009
  • Ram 2500/3500 6.7L 24V Cummins 2010-2018
Application Notes:
  • A Fleece Performance fuel filter delete is required for use with this product and must already be installed or purchased separately.
  • This kit does not include a quick disconnect fitting to adapt to the OE lift pump. If you are running this kit with a stock OE sending unit on the fuel tank use P/N: FPE-QUCON-OE-38 to allow for an AN connection to the stock quick disconnect style fitting.

Other Part Numbers:
Fleece Performance #FPE-CUMM-HFFBA-0318-FQWW

Proposition 65

WARNING: Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov

Fleece Performance Banner

Who is Fleece Performance?

Fleece Performance is an aftermarket company established in 2008 in North Salem, IN, by Brayden and Chase Fleece. The company is known for manufacturing performance parts for various diesel engines. Today, Fleece Performance is the leading brand in the market when it comes to diesel aftermarket parts. 

Diesel Performance Parts Experts

The company’s founders Brayden and Chase, are fellow enthusiasts themselves. They decided that they wanted to improve the products already existing in the market. Using their vehicle as their product’s testbed, they created some of the best parts available today. As a result, they have established a reputation as a brand that provides innovative products that pushed the limits of diesel performance technology.

Quality Made Products

The company offers a wide range of turbochargers, AN Fittings, Fuel system parts, and cylinder head kits. They cater to a variety of automotive brands such as Ford, Dodge, and Chevy. Each product is carefully designed to produce optimum performance and is developed, assembled, and tested in their in-house facility. 

The company received its ISO certification in 2020, which shows that the company adheres to the strict standard set by the regulators.

Purchase Fleece Performance Products At Vivid Racing

If you are in the market for high-quality diesel performance parts, then Fleece Performance is the brand for you. They have been manufacturing quality parts for more than ten years and has gained the trust of many diesel enthusiast and racers alike. To know more about Fleece Performance, visit Vivid Racing and check out their list of products that fit your specific need.

Fleece Performance Engineering develops and manufactures performance productsfor the diesel automotive industry. Throughout the design, validation, and manufacturing process our products are tailored to the high performance diesel community. We understand that the high performance industry will inherently push hardware to its failure point.We stand behind our products and are confident that when integrated in the appropriate application they will live a long and successful life.

LIMITED WARRANTY ON NEW FLEECE PERFORMANCE ENGINEERING PRODUCTS (US AND CANADA ONLY)

Fleece Performance Engineering will provide for repairs or replacement, at its option, during the warranty period of each new product model listed on page 2 in accordance with the following terms, conditions, and limitations: View HERE
You're seeing this because you're logged into an employee account or you're accessing the site through an internal IP address. This information is not normally visible.
Things
Sale price None
Wholesale price $450.35
Shipping Weight: 10.00
Length: 10
Width: 10
Height: 8
Product Added At Monday 19 December, 2022
Product Modified At Friday 11 July, 2025
Imported By ETLOverride
Last Edited By vendordata@vividracing.com
View In Admin

Emissions Info
Carb Approved Yes
Carb Number -
Epa Status N/A
Prop65 Unknown
Carb Required -
Vendors
Some placeholder content for the collapse component. This panel is hidden by default but revealed when the user activates the relevant trigger.
Vendor Inv Cost Retail Jobber MAP Core Updated
Fleece Performance $381.65 $471.45 $404.10 $449.00 ? 2025-07-11 06:02:31


Check out these other great products