Introducing the HSP Cold Air Intake for 2017-2019 Ford Powerstroke F250/350 6.7L

The HSP-P-402-2-HSP is your go-to cold air intake for the 2011-2017 6.7 Powerstroke. But what exactly is the HSP Cold Air Intake for the 2017-2019 Ford Powerstroke F250/350 6.7L?

Performance You Can Feel

This intake has been thoughtfully engineered to capture incoming airflow more efficiently than the stock setup, all while keeping the factory MAF calibration intact. It takes the most direct route for airflow into your engine, ensuring you get the performance you crave.

On the dyno, this intake showed an impressive gain of 12.5 horsepower over the stock version and shifted peak torque to 500 RPM earlier in the power band. You’ll not only feel the difference in engine performance, but you’ll also notice a more pronounced turbo sound compared to the factory intake. Plus, it comes with a newly designed HSP air filter that boasts a larger filter area than previous models.

What Makes the HSP Cold Air Intake Stand Out?

One of the key features of this intake is its location. It sits in the engine bay, right in front of the vehicle, allowing it to draw in cooler ambient air more effectively than the stock setup. The single-piece, mandrel-bent 4.5-inch intake pipe has fewer restrictions and bends, which means better airflow.

To top it off, the sheet metal heat shield box captures the filter and deflects heat from the engine bay, preventing heat soak in the intake system.

What’s Included with the HSP Cold Air Intake?

• Illusion Cherry finish
• (1) High flow 4.5-inch intake tube
• (1) Heat shield box
• (1) 4.5-inch filter
• All necessary hardware
• Boots and clamps
• Battery tie down
• Battery relocation kit

Compatibility

This intake is specifically designed to fit the 2017-2019 6.7L Powerstroke engine. Be sure to double-check your truck's year before ordering, as there have been slight changes in the engine bay during those years.

Important Note

Dyno data was collected from a completely stock truck with factory calibration in a controlled environment. Keep in mind that results may vary based on engine modifications and ambient conditions. For the best performance, consider pairing it with HSP intercooler piping.

Key Features

• Boosted performance
• Maximizes factory parts and emissions system
• High-flowing cold air intake
• 4.5-inch diameter tube
• High-strength 5-layer silicone boots
• Powder coat options for a sleek look under the hood

Our Commitment to You

HSP No BS Limited Lifetime Warranty

At HSP, we take pride in our products and stand firmly behind each one that leaves our facility. For years, we’ve gone above and beyond to address any issues our customers faced, and now we’re excited to introduce a solid warranty. Our commitment to you remains the same: we’re here to support you every step of the way.