See all Exhaust Parts products
Product thumb
Injen SES Muffler Delete Kit Ford Bronco 2021-2025
$229.95
Free Shipping Hurry Low Stock
The all-new 6th Generation Ford Bronco is an amazing vehicle that comes from the factory ready to tackle the world. That said, there are a few design flaws that limit the amazing ability the Bronco has to offer. One of those flaws is the reduced approach and departure angle from the oversize stock muffler and low hanging exhaust tip. Injen has recognized this issue and has an affordable solution that allow you not only improve your approach and departure angles, but also improve performance and completely change the sound of your Bronco!

The SES9300MD is our newest muffler delete kit for the 2021-2025 Ford Bronco equipped with either the L4-2.3L Turbo or the V6-2.7L Twin Turbo. This simple and effective muffler delete kit is a fantastic solution for those that want to climb those steeper obstacles without breaking the bank on a high tuck exhaust. In fact, you can easily swap over to this muffler delete for the weekend wheeling trips and then reinstall your OE muffler for your weekly commute, all within 20 minutes.

This isn't a cheap delete kit made from thin cold-rolled steel that will either rust or crack, the Injen Muffler Delete kit is made for 304 stainless steel that is mandrel bent right here in Pomona, CA for durable, long-lasting performance. During the design process, our engineers made sure that the install was a simple as possible and retained the use of the factory hanger locations. This allows for quick swaps without throwing any wrenches!

As always, the SES9300MD muffler delete works seamlessly with our full line of Jeep performance products. From Rotomolded air intakes to throttle response controllers to complete performance exhaust systems, Injen Technology is here to help you take on the world in your Bronco!

SES Muffler Delete Kit, Part No. SES9300MD, 2021-2025 Ford Bronco L4-2.3L Turbo / V6-2.7L Twin Turbo



Features:
  • Compatible Throttle Controller: PT0013B
  • Exhaust System Connection: Clamp On
  • Exhaust Tip Finish: Stainless Steel
  • Exhaust Tip Material: Stainless Steel
  • Exhaust Tip Outside Diameter: 3.00
  • Exhaust Tip Quantity: 1
  • Grade Type: Performance
  • Hangers Included: Yes
  • Hardware Included: Yes
  • Mid Section Pipe OD: N/A
  • Pipe Material: 304 Stainless Steel
  • Prop 65 - Short Label: prop65_warning
  • Prop 65 (C, R or CR): CR
  • Prop 65 Yes/No: Yes
  • Rear Section Pipe OD: 3.00
  • Title: Injen SES Muffler Delete Exhaust System


Fitment:
  • Ford Bronco L4-2.3L Turbo / V6-2.7L Twin Turbo 2021-2025
Notes:
  • Fits 2-Door and 4-Door Models
Proposition 65

WARNING: Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov

Who is Injen?

Injen is highly recognized in the automotive industry. The company started in 1991 and specializes in manufacturing high-quality air induction products.  The company has become the go-to brand by multiple import tuners and has since become an automotive icon in the industry.

Years of Experience

For more than three decades, the company has created dozens of patents and thousands of new products. All of their products are dyno-tested to ensure that it provides optimum performance to the vehicle it is applied to.

Injen offers a variety of products ranging from intake systems, intercoolers, exhaust systems, and other performance parts. All their products are made out of high-quality materials and are designed by the industry’s top designers and engineers. This enables them to create products that are not only functional but adds an aesthetic value to the vehicle. Even up to now, the company never stops in improving its product. Hence, they are a favorite of tuners who wanted to have the best.

Purchase Injen Products at Vivid Racing

If you are looking for products that provide performance gains and are tried and tested, then Injen is the brand for you. They have been used by thousands of enthusiasts worldwide and have provided them high-performance products they truly deserve. The company has one of the most comprehensive lists of products that applies to most vehicles available in the market. You can never go wrong with Injen.

Visit Vivid Racing and check out their list of products that would fit your specific needs.

Injen Banner

INTAKE WARRANTY

Injen Technology offers a Limited Lifetime Warranty to the original purchaser against defects in material and workmanship on all intake systems excluding the filter element. Injen Technology will replace at no charge, any intake pipe considered by Injen Technology to be defective. The warranty is void if the warranty card is not returned to Injen Technology within the first 30 days of purchase. Any and all warranty coverage is limited to the repair or replacement of the defective part only, at Injen Technology.s discretion. Proof of purchase is required. The warranty does not cover incidental or consequential damages, nor does it cover the cost of installation or removal of the defective part or its replacement.

EXHAUST WARRANTY

Injen Technology offers a one-year warranty to the original purchaser against defects in material and workmanship on all exhaust systems. Injen Technology will replace at no charge, any exhaust system considered by Injen Technology to be defective. Any and all warranty coverage is limited to the repair or replacement of the defective part only, at Injen Technology's discretion. Proof of purchase is required. The warranty does not cover incidental or consequential damages, nor does it cover the cost of installation or removal of the defective part or its replacement.

AIR INTAKES AND ACCESSORIES

Injen Technology offers a Limited Lifetime Warranty to the original purchaser against defects in material and workmanship on all intake systems excluding the filter element. Injen Technology will replace at no charge, any intake pipe considered by Injen Technology to be defective. The warranty is void if the warranty card is not returned to Injen Technology within the first 30 days of purchase. Any and all warranty coverage is limited to the repair or replacement of the defective part only, at Injen Technology's discretion. Proof of purchase is required. The warranty does not cover incidental or consequential damages, nor does it cover the cost of installation or removal of the defective part or its replacement. All warranty items must be sent freight prepaid with a valid RMA (Return Merchandise Authorization) number and copy of original invoice.

SES INTERCOOLERS AND EXHAUST SYSTEMS

Injen Technology offers a one-year warranty to the original purchaser against defects in material and workmanship on all exhaust systems. SES Intercooler and exhaust systems that have been installed will not be eligible for return under any circumstances. Defective parts will be replaced or repaired as deemed necessary by Injen Technology. All other warranty issues will apply as indicated under the Air Intake section. Most exhaust and Intercooler system installations may require a lift and or specialized tools. Due to the installation complexity of automotive exhaust and Intercooler systems, Injen Technology recommends that a qualified technician perform the installation. Most local Tuner or exhaust and muffler shops offer professional installation.

You're seeing this because you're logged into an employee account or you're accessing the site through an internal IP address. This information is not normally visible.
Things
Sale price None
Wholesale price $184.51
Shipping Weight: 6.00
Length: 26
Width: 14
Height: 9
Product Added At Monday 26 June, 2023
Product Modified At Thursday 27 March, 2025
Imported By ETLOverride
Last Edited By kathi@vividracing.com
View In Admin

Emissions Info
Carb Approved No
Carb Number -
Epa Status N/A
Prop65 Yes
Carb Required -
Vendors
Some placeholder content for the collapse component. This panel is hidden by default but revealed when the user activates the relevant trigger.
Vendor Inv Cost Retail Jobber MAP Core Updated
Injen $156.37 $229.95 $218.45 $229.95 ? 2025-03-27 16:25:23
Injen 4 ? ? $218.45 ? ? 2025-07-09 23:27:14
Premier WD MFG Inventory : 4
Inventory Type: NonStocking

Active Promo Shipping:
1-39lbs, $10 to ship ground
$161.11 $218.45 $218.45 $229.95 ? 2025-07-09 22:07:41
Turn 14 EastStock: 3
CentralStock: 3
Stock: 8
EastETA: 2025-07-09

PromoShipping $12.99
PromoShipEndDate 2099-03-01
$141.99 $229.95 $218.45 $229.95 ? 2025-07-10 10:25:18

Manufacturer Direct Shipping
This item is available for direct shipping from the manufacturer. Please verify stock availability with the manufacturer. Once confirmed, you can place an order through [Injen], who will arrange for dropshipping from the manufacturer directly to our customer.

Check out these other great products