
The SES1342AB is everything you could ask for from a performance exhaust system. From the Investment Cast Flanges to the beautiful center exit, Dual Carbon Fiber Exhaust Tips, this kit is designed for peak performance while maintaining a powerful tone and sensible volume control. The massive Mandrel-Bent 76mm 304 Stainless Steel Piping allows your engine to breathe freely, unbridling every ounce of potential this truly capable platform can produce. Our single-in/dual-out muffler design allows the powerful primary exhaust note to shine through while removing unwanted rasp and turbulence. While our muffler design provides a substantial increase in operating volume, it is designed to keep exhaust drone to a minimum. We have put countless hours into delivering the perfect blend of performance and sound when you need it, without creating an uncomfortable cabin environment during your commute.
Here at Injen, there is no sacrificing build quality. Each and every component included with this kit has been tried, tested, and proven over decades of refinement. The SES1342AB utilizes Investment Cast Flanges to provide an incredibly precise fit and finish, not to mention the simplest installation process available. Hand-crafted with only the finest materials, this kit utilizes 304 Stainless Steel tubing, hangers, and flanges. If the tone alone doesn't garner enough attention, the detachable rear hangers include a cut Injen logo that's sure to impress anyone that takes the time to look at what lies beneath. Not to mention, all of Injen's Exhaust Systems are hand-crafted in Pomona, CA with the highest level of precision possible. Designed to fit into factory mounting locations, with no cutting or drilling required. As always, the industry-leading Injen Technology Limited Lifetime Warranty ensures that the exhaust you love will last for years to come.
Performance Axle Back Exhaust System, Part No. SES1342AB, 2019-2021 Hyundai Veloster L4-1.6L Turbo
Features
- Compatible Throttle Controller: N/A
- Exhaust System Connection: Flanged
- Exhaust Tip Finish: Carbon Fiber
- Exhaust Tip Outside Diameter: 101
- Exhaust Tip Quantity: 2
- Grade Type: Performance
- Hangers Included: Yes
- Hardware Included: Yes
- Muffler Body Material: 304 Stainless Steel
- Muffler Body Shape: Oval
- Muffler Quantity: 1
- Pipe Material: 304 Stainless Steel
- Prop 65 - Short Label: prop65_warning.jpg
- Prop 65 (C, R or CR): CR
- Prop 65 Yes/No: Yes
- Rear Section Pipe OD: 76
- Title: Injen Performance Axle Back Exhaust System
- Y-Pipe Included: No
Notes:
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
Injen is highly recognized in the automotive industry. The company started in 1991 and specializes in manufacturing high-quality air induction products. The company has become the go-to brand by multiple import tuners and has since become an automotive icon in the industry.
Years of ExperienceFor more than three decades, the company has created dozens of patents and thousands of new products. All of their products are dyno-tested to ensure that it provides optimum performance to the vehicle it is applied to.
Injen offers a variety of products ranging from intake systems, intercoolers, exhaust systems, and other performance parts. All their products are made out of high-quality materials and are designed by the industry’s top designers and engineers. This enables them to create products that are not only functional but adds an aesthetic value to the vehicle. Even up to now, the company never stops in improving its product. Hence, they are a favorite of tuners who wanted to have the best.
Purchase Injen Products at Vivid RacingIf you are looking for products that provide performance gains and are tried and tested, then Injen is the brand for you. They have been used by thousands of enthusiasts worldwide and have provided them high-performance products they truly deserve. The company has one of the most comprehensive lists of products that applies to most vehicles available in the market. You can never go wrong with Injen.
Visit Vivid Racing and check out their list of products that would fit your specific needs.
Injen Technology offers a Limited Lifetime Warranty to the original purchaser against defects in material and workmanship on all intake systems excluding the filter element. Injen Technology will replace at no charge, any intake pipe considered by Injen Technology to be defective. The warranty is void if the warranty card is not returned to Injen Technology within the first 30 days of purchase. Any and all warranty coverage is limited to the repair or replacement of the defective part only, at Injen Technology.s discretion. Proof of purchase is required. The warranty does not cover incidental or consequential damages, nor does it cover the cost of installation or removal of the defective part or its replacement.
EXHAUST WARRANTY
Injen Technology offers a one-year warranty to the original purchaser against defects in material and workmanship on all exhaust systems. Injen Technology will replace at no charge, any exhaust system considered by Injen Technology to be defective. Any and all warranty coverage is limited to the repair or replacement of the defective part only, at Injen Technology's discretion. Proof of purchase is required. The warranty does not cover incidental or consequential damages, nor does it cover the cost of installation or removal of the defective part or its replacement.
AIR INTAKES AND ACCESSORIES
Injen Technology offers a Limited Lifetime Warranty to the original purchaser against defects in material and workmanship on all intake systems excluding the filter element. Injen Technology will replace at no charge, any intake pipe considered by Injen Technology to be defective. The warranty is void if the warranty card is not returned to Injen Technology within the first 30 days of purchase. Any and all warranty coverage is limited to the repair or replacement of the defective part only, at Injen Technology's discretion. Proof of purchase is required. The warranty does not cover incidental or consequential damages, nor does it cover the cost of installation or removal of the defective part or its replacement. All warranty items must be sent freight prepaid with a valid RMA (Return Merchandise Authorization) number and copy of original invoice.
SES INTERCOOLERS AND EXHAUST SYSTEMS
Injen Technology offers a one-year warranty to the original purchaser against defects in material and workmanship on all exhaust systems. SES Intercooler and exhaust systems that have been installed will not be eligible for return under any circumstances. Defective parts will be replaced or repaired as deemed necessary by Injen Technology. All other warranty issues will apply as indicated under the Air Intake section. Most exhaust and Intercooler system installations may require a lift and or specialized tools. Due to the installation complexity of automotive exhaust and Intercooler systems, Injen Technology recommends that a qualified technician perform the installation. Most local Tuner or exhaust and muffler shops offer professional installation.
Sale price | None |
Wholesale price | $593.74 |
Shipping |
Weight: 23.00 Length: 41 Width: 11 Height: 11 |
Product Added At | Wednesday 09 August, 2023 |
Product Modified At | Tuesday 04 March, 2025 |
Imported By | ETLOverride |
Last Edited By | kathi@vividracing.com |
View In Admin |
Carb Approved | Yes |
---|---|
Carb Number | - |
Epa Status | N/A |
Prop65 | Yes |
Carb Required | - |
Vendor | Inv | Cost | Retail | Jobber | MAP | Core | Updated | |||
---|---|---|---|---|---|---|---|---|---|---|
Injen | $503.17 | $739.95 | $702.95 | $739.95 | ? | 2025-03-04 13:15:06 | ||||
Injen | 2 | ? | ? | $702.95 | ? | ? | 2025-07-09 23:27:14 | |||
Premier WD |
MFG Inventory : 2 Inventory Type: NonStocking |
$518.43 | $702.95 | $702.95 | $739.95 | ? | 2025-07-10 02:15:44 |