.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear 
If you're looking to really push the limits of your MK5 or MK6 GTI, Golf R, or any 2.0T Audi/VW, the Integrated Engineering MK5/MK6 FDS intercooler system is a game changer. This isn't just another piece of aftermarket gear; it's a thoughtfully designed upgrade that addresses one of the biggest challenges when you start cranking up the power—keeping your engine cool.
What makes this intercooler stand out? For starters, it boasts a core that's a whopping 54% larger than the stock intercooler. We’re talking about a massive 885.06 cubic inches of core volume that delivers cooler air to your engine, no matter the conditions. That means you can say goodbye to heat soak and hello to increased horsepower and torque. This intercooler is built to prevent horsepower loss from heat, which is crucial when you're pushing your ride to its limits.
The design is all about efficiency, too. The large bar and fin core measures 16.39" x 24" x 2.25", which allows for a 65% increase in heat dissipation compared to other intercoolers on the market. Plus, the end tanks are beautifully cast and machined right here in the USA, ensuring durability and a perfect fit. You won’t have to worry about trimming anything; it’s designed for a perfect OEM fit, which is a huge relief when you're trying to keep your install clean and straightforward.
Installation is a breeze with fully machined mounting bosses and inlet/outlet connections that guarantee a leak-free seal. The large 2.75" inlet and outlet connections paired with 5-ply silicone hoses and a billet adapter mean you’re set for reliability. And yes, all the necessary hardware and hose clamps are included, so you can dive right into the install without a trip to the hardware store.
Now, let’s talk fitment. This intercooler works with a variety of models, including the Audi 8P A3 & S3 (though keep in mind that if you have the EA888 Gen 1/2 TSI, you might need a custom inlet hose). It’s also compatible with the MK5 and MK6 GTI, MK6 Golf R, and several other VW and Audi models. Just make sure to check the specifics for your ride.
In short, if you're serious about performance and looking for a reliable way to keep your engine cool while boosting power, the Integrated Engineering MK5/MK6 FDS intercooler system is worth considering. It’s been designed by folks who know what it takes to get the most out of your setup, and it really shows in the performance.
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
Integrated Engineering was founded in 2007 in Salt Lake City, Utah. It was started by two brothers Peter and David Blais. The two shared the same passion for racing, and this has jumpstarted the two to create Integrated Engineering.
The company specializes in manufacturing performance products such as rods, camshafts, valve trains, and Billett accessories. Today, they have become a household name when it comes to performance.
German Car ExpertsIntegrated Engineering focuses on producing performance products for Audi and VWs. As the experts in these platforms, they are able to pinpoint exactly what parts need to be improved to bring out the best in those vehicles. The company considers not only the performance gain but its reliability as well. Their goal is to turn these vehicles into a better performing machine without compromising its reliability.
Attention to Detail is the KeyTo create top quality products, the company carefully studies each design detail using specialized software. This enables them to fine-tune the design before it goes to actual manufacturing. They first test their design in ABS plastic to ensure that all measurements are accurate and on the spot. Once everything has been checked, their performance products are then tested in their in-house engine and chassis dyno machine for long hours to test its performance and reliability.
This attention to detail has enabled their parts to perform in extreme conditions and withstand the punishment usually endured during high-performance applications.
Purchase Integrated Engineering Products at Vivid RacingIf you want to improve the way your Audi or VW performs, then Integrated Engineering has got you covered. Their expertise in these platforms has made them the go-to brand when it comes to performance, and it has gained them the trust of many enthusiasts everywhere. Visit Vivid Racing and see their list of products that would fit your specific needs.
| Sale price | None |
| Wholesale price | $876.14 |
| Shipping |
Weight: 40.85 Length: 46 Width: 24 Height: 11 |
| Product Added At | Monday 22 October, 2018 |
| Product Modified At | Wednesday 18 June, 2025 |
| Imported By | ETLOverride |
| Last Edited By | daveabalosgomez@gmail.com |
| View In Admin |
| Carb Approved | No |
|---|---|
| Carb Number | - |
| Epa Status | - |
| Prop65 | - |
| Carb Required | - |
| Vendor | Inv | Cost | Retail | Jobber | MAP | Core | Updated | |||
|---|---|---|---|---|---|---|---|---|---|---|
| Integrated Engineering | $742.49 | $989.99 | ? | $989.99 | ? | 2025-06-18 21:58:54 |
