.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear 
The EVO MFG Front and Rear LCG Bolt-On Coilover kits come complete with all necessary parts to easily convert the JK from the limited coil and shock system to a far superior performing coilover system. 12 inch's of usable wheel travel, custom built brackets for the lowest center of gravity, EVO's legendary SPEC valving and spring rates specifically dialed in for the JK to yield excellent handling.
The EVO MFG LCG Bolt-On Coilover system Proves to set the bar, for ease of install, price and performance. LCG 3 inch-5 inch recommended lift height, fully adjustable minimal drilling/cutting required, fully bolt-on Hi Clearance design. Retains all factory rear exhaust system as well as factory front and rear swaybars.
The EVO MFG Adjustable Front Lower Control Arms are made from 2.00 inch x .281 inch wall DOM tubing, feature complete on car adjustability without removing mounting bolts. This adjustability allows for caster adjustments to be made completely while installed on car to dial in your handling and caster alignment with ease. No need to remove the control arm to make adjustments. Currie Johnny Joints are used on both ends of each arm, rebuildable, greaseable, and isolated construction for decreased transmission of road vibrations.
The EVO MFG Draglink Flip Kit raises trackbar mounting location 3 inches at the axle to help correct roll center and steering angles of a lifted JK. Roll center is greatly improved giving better handling/ steering response of the vehicle on and off road. The EVO MFG Drag Link Flip Kit features an imProved steering stabilizer mounting location to get it up and out of harm's way above the tie rod. This package is the ultimate in budget conscious extreme on and off road performance.
Includes:
- Front Lower and rear upper Adjustable control arms
- Front and rear coilover kits
- Draglink flip steering upgrade
Features:
- Jeep Wrangler JK Enforcer Pro Stage 2 Black
- Stage: Stage 2
- Series: Enforcer Pro
- Color: Black
- Travel Length: 12 Inch
- Material: DOM Steel
- Hardware Included: Yes
- Sold As: Kit
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
Evo Manufacturing is a company specializing in aftermarket parts and accessories for offroad vehicles. They have been producing quality parts for years, such as upgraded suspension parts, brackets to steel bumpers.
With the years in the industry, they have made a name for themselves. They have also proven that their products can match those from mainstream brands.
Jeep ExpertsThe company focuses on the Jeep platform. They have a comprehensive list of parts to upgrade your Jeep.
Jeep vehicles have been a great part of the offroading industry and are used by many offroad enthusiasts. Evo Manufacturing took advantage of this and designed its products around this platform.
Quality ProductAll of their products are made from high-quality materials and have been designed by highly qualified engineers. Each component is meticulously analyzed and manufactured. The parts are designed to fit perfectly in the vehicle, eliminating the need for extensive modification and conversion. This provides a hassle-free experience to their customers.
One-Stop-ShopWhat is good about Evo Manufacturing is that they have all the parts you need to upgrade your Jeep. Using real-world experiences, they know what part you need to change and how to improve it. This is what makes Evo Manufacturing a successful company - knowing what the people want and advising them what they need.
Purchase Evo Manufacturing Parts at Vivid RacingIf you want to turn your Jeep into a formidable offroad vehicle, then Evo Manufacturing has all the right parts for you. Tried and tested to be tougher than stock, Evo Manufacturing is a company you could put your trust in. Visit Vivid Racing and check their list that would fit your specific requirements.
Proof of purchase is required for all warranty claims.
EVO Manufacturing is not responsible for any labor charges, shipping charges and other costs in result of a warranty claim of any EVO Manufacturing product
EVO Manufacturing is not responsible for any and all costs associated with incidental and consequential damages and are excluded under this warranty, regardless of when, where or why the warranty occurs
All EVO Manufacturing products must be deemed to be installed correctly, unaltered, free from abuse and combined with other appropriate equipment/products/components.
Exceptions to stated warranty: Wearable items are not included in warranty. These products include but are not limited to tie rod ends, draglinks, bushings, bump stops, bearings, heim joints, uniballs/spherical bearings etc. and hardware.
Any substitution of other manufactures components or exemption of required and or supplied components will immediately void all warranties.
EVO Manufacturing does not warranty any product not manufactured by EVO Manufacturing.
EVO Manufacturing warranty applies to only products purchased, sold, installed and remaining in the United States of America.
Product Finish is not covered under warranty
Springs and Shocks are warrantied against manufacturing defects only and are only returnable if they have not been installed on a vehicle.
EVO Manufacturing products that are used for competition and or racing immediately void all warranties.
EVO Manufacturing recommends the installation of EVO MFG products be installed by certified technicians only.
EVO Manufacturing is not responsible or liable for any loss, damage, injury whether consequential, ordinary, direct, special or incidental arising from the manufacture, sale, resale, installation, delivery, possession, handling and or use of its products.
EVO Manufacturing is not responsible for any typographical errors in either pricing or content related to all EVO Manufacturing related products, items, websites, packaging, instructions etc.
| Sale price | None |
| Wholesale price | $6,431.14 |
| Shipping |
Weight: 219.00 Length: ? Width: ? Height: ? |
| Product Added At | Saturday 25 May, 2019 |
| Product Modified At | Friday 11 July, 2025 |
| Imported By | EPICF |
| Last Edited By | vendordata@vividracing.com |
| View In Admin |
| Vendor | Inv | Cost | Retail | Jobber | MAP | Core | Updated | |||
|---|---|---|---|---|---|---|---|---|---|---|
| Meyer Distributing | $5,450.12 | $6,144.61 | $6,618.01 | $6,144.61 | ? | 2025-07-11 00:49:56 |
