.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear 
When EVO MFG was asked to face a challenge of designing a suspension that meets the criteria of driving a vehicle heavily on and off road for upwards of 300 miles a day, every day, from high speed pursuits on and off road to slow rock crawling in some of the most remote areas of our country, four factors were taken into upmost consideration.
Fatigue to occupants, reliability, functionality, affordability. For the challenge we deemed the EVO MFG Enforcer Suspension package. We Smoothed and Balanced the Overall Ride Quality with EVO MFG Plush Coils Front Adjustable Lower Control Arms to correct caster angle with EVO MFG onVehicle Adjusters. Stage 2 includes in addition Rear Adjustable Upper Control Arms to adjust pinion angle. Stage 3 includes all 8 Adjustable Control arms for full suspension tuning.
All stages include the EVO MFG Draglink Flip Kit, When lifting your JK 3.0 inches or greater, it is highly recommended to correct some of the steering geometry that has been altered with the lift. The EVO MFG JK Draglink Flip Kit does just that and more. Raises trackbar mounting location 3.0 inch at the axle to help correct roll center and steering angles of a lifted JK.
Roll center is greatly improved giving better handling of the vehicle on and off road. Complete bolt-on design that gives greater strength to already prone to failure factory front trackbar bracket.
Features:
- JK Enforcer Kit 3.0 Inch with Draglink Flip Stage 3
- Rear Roll Center correction trackbar bracket
- Stainless Steel Brakelines
- All necessary hardware included
- Comes complete with new forged draglink
- All bracketry made from 3/16 inch thick laser cut and CNC bent sheet metal
- All bracketry is finished in a corrosion resistant Black Powdercoat
- Integrated new steering stabilizer location built in to get it up and out of harm's way above the tie rod
- Drilling of the passenger side steering knuckle with 13/16 inch drill bit is required to complete the install
- Stage: Stage 3
- Installation Time: 10.0-14.0 Hours
- Lift Height: 4.0 Inch
- Series: Enforcer
- Mount Style: Bolt On
- Hardware Included: Yes
- Sold As: Kit
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
Evo Manufacturing is a company specializing in aftermarket parts and accessories for offroad vehicles. They have been producing quality parts for years, such as upgraded suspension parts, brackets to steel bumpers.
With the years in the industry, they have made a name for themselves. They have also proven that their products can match those from mainstream brands.
Jeep ExpertsThe company focuses on the Jeep platform. They have a comprehensive list of parts to upgrade your Jeep.
Jeep vehicles have been a great part of the offroading industry and are used by many offroad enthusiasts. Evo Manufacturing took advantage of this and designed its products around this platform.
Quality ProductAll of their products are made from high-quality materials and have been designed by highly qualified engineers. Each component is meticulously analyzed and manufactured. The parts are designed to fit perfectly in the vehicle, eliminating the need for extensive modification and conversion. This provides a hassle-free experience to their customers.
One-Stop-ShopWhat is good about Evo Manufacturing is that they have all the parts you need to upgrade your Jeep. Using real-world experiences, they know what part you need to change and how to improve it. This is what makes Evo Manufacturing a successful company - knowing what the people want and advising them what they need.
Purchase Evo Manufacturing Parts at Vivid RacingIf you want to turn your Jeep into a formidable offroad vehicle, then Evo Manufacturing has all the right parts for you. Tried and tested to be tougher than stock, Evo Manufacturing is a company you could put your trust in. Visit Vivid Racing and check their list that would fit your specific requirements.
Proof of purchase is required for all warranty claims.
EVO Manufacturing is not responsible for any labor charges, shipping charges and other costs in result of a warranty claim of any EVO Manufacturing product
EVO Manufacturing is not responsible for any and all costs associated with incidental and consequential damages and are excluded under this warranty, regardless of when, where or why the warranty occurs
All EVO Manufacturing products must be deemed to be installed correctly, unaltered, free from abuse and combined with other appropriate equipment/products/components.
Exceptions to stated warranty: Wearable items are not included in warranty. These products include but are not limited to tie rod ends, draglinks, bushings, bump stops, bearings, heim joints, uniballs/spherical bearings etc. and hardware.
Any substitution of other manufactures components or exemption of required and or supplied components will immediately void all warranties.
EVO Manufacturing does not warranty any product not manufactured by EVO Manufacturing.
EVO Manufacturing warranty applies to only products purchased, sold, installed and remaining in the United States of America.
Product Finish is not covered under warranty
Springs and Shocks are warrantied against manufacturing defects only and are only returnable if they have not been installed on a vehicle.
EVO Manufacturing products that are used for competition and or racing immediately void all warranties.
EVO Manufacturing recommends the installation of EVO MFG products be installed by certified technicians only.
EVO Manufacturing is not responsible or liable for any loss, damage, injury whether consequential, ordinary, direct, special or incidental arising from the manufacture, sale, resale, installation, delivery, possession, handling and or use of its products.
EVO Manufacturing is not responsible for any typographical errors in either pricing or content related to all EVO Manufacturing related products, items, websites, packaging, instructions etc.
| Sale price | None |
| Wholesale price | $3,452.80 |
| Shipping |
Weight: 168.00 Length: ? Width: ? Height: ? |
| Product Added At | Thursday 21 February, 2019 |
| Product Modified At | Friday 11 July, 2025 |
| Imported By | EPICF |
| Last Edited By | vendordata@vividracing.com |
| View In Admin |
| Vendor | Inv | Cost | Retail | Jobber | MAP | Core | Updated | |||
|---|---|---|---|---|---|---|---|---|---|---|
| Meyer Distributing | $2,926.10 | $3,550.14 | $3,550.14 | $3,550.14 | ? | 2025-07-11 00:49:56 |
