.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear 
We are known for making the best Subaru Performance Oiling Products money can buy, so addressing this was right up our alley. Of course, our own spin on improvements, besides the obvious, had to be made to assure set-it-and-forget-it reliability that comes with our products. A means for improving performance was taken advantage of during the design process as well.
The obvious big change is that the tube has no bend. No bend means no restriction, and even better coming from the OEM tube because it uses a more restrictive pinch bend. The ID of the tube has been increased, and so has the thickness. The angle of the tube points it directly at the inlet into the block. Like our EJ engine Ultimate Oil Pickup, this one also uses a screen to match the OEM spec opening size of the mesh. We also use a higher strength screen material. The screen area has been increased over 31%, which reduces the restriction and stress on the screen. Our screen is lightly pressed and welded into place, assuring that the wire does not get stressed or heat damaged. TIG welding throughout assures proper weld penetration and quality. The material is 4130 Alloy Steel to provide a further increase in strength over the brazed stamped steel OEM version. The units have been pressure tested to 150psi over the face of the screen without issue.
Killer B Motorsport has many years of being at the forefront of Subaru Oiling system performance. Improvements have been made to the oil pickup design to improve the oil flow characteristics and address the screen design to eliminate the process that causes screen failure with the OEM units.
Features:
- Tube features larger inside diameter and thicker wall for increased flow capacity and strength.
- No bends provide maximum flow potential (OEM unit uses a restrictive punch bend).
- Screen flow area increased by over 31% to improve flow, reduce restriction.
- Made from 4130 High Strength Alloy Steel for never fail reliability
- Hand TIG welded
- Made in the USA
- Scion FRS 2015-2021
- Subaru BR-Z 2015-2021
- This part number ONLY works with BRZ/FR-S.
Other Part Numbers:
Killer B #klb10015OP-BF
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
Killer B is an aftermarket company based in Waynesboro Virginia. They are known for producing parts and accessories for the automotive industry, specifically, Subaru made vehicles. The company started out in a small garage equipped with only a handful of tools, passion and enthusiasm for cars. Today, they are one of the go-to Subaru experts in the market.
Hands-On CompanyThe company has involved itself with various racing teams and ordinary daily drivers to understand what their customers want. By getting information directly from them, they are able to produce parts that satisfy their actual needs. Over the years, they were able to perfect their craft and become experts when it comes to the Subarus.
Quality ProductsAll of their products are done in-house, from design to actual manufacturing and fabrication. This allows them to have full control over their quality. and at the same time, ensure that their products come out the way they would like it to be. Designed by enthusiasts for fellow enthusiasts, you can be sure that you will only be getting the best value for your money.
Purchase Killer B Products At Vivid RacingIf you own a Subaru and are in the market for high-quality performance parts and accessories for your vehicle, then Killer B is the brand for you. Dealing with Subaru’s, they understand what it takes to improve your vehicle’s visual look and performance. To know more about Killer B, visit Vivid Racing and check out their list of products that fit your specific requirement.
Warranty claims must be shipped back to Killer B Motorsport for review. You must call or email for return authorization prior to returning the product. For warranty evaluation please return your item to Killer B Motorsport Warranty, 1 Solution Way, Suite 201, Waynesboro, VA 22980.
Warranty claims will not be honored if the product was not purchase through an approved dealer.
Killer B Motorsport does not Warranty Wrapped Headers.
| Sale price | None |
| Wholesale price | $135.66 |
| Shipping |
Weight: 0.80 Length: 9 Width: 7 Height: 3 |
| Product Added At | Monday 20 March, 2023 |
| Product Modified At | Friday 11 July, 2025 |
| Imported By | ETLOverride |
| Last Edited By | Turn_API |
| View In Admin |
| Carb Approved | Yes |
|---|---|
| Carb Number | - |
| Epa Status | N/A |
| Prop65 | Unknown |
| Carb Required | - |
| Vendor | Inv | Cost | Retail | Jobber | MAP | Core | Updated | |||
|---|---|---|---|---|---|---|---|---|---|---|
| Turn 14 | $114.97 | $153.00 | ? | $153.00 | ? | 2025-07-11 10:28:29 |
