See all Suspension products
Product thumb
Pro Comp 6in Lift Kit GMC Sierra 1500 Denali 4WD 2019+
$2346.80
General Motors 2019 Chevrolet Silverado 1500 and GMC Sierra 1500 trucks are completely new from the top down and ground up. The new chassis design gives Pro Comp the opportunity to offer their highest performing GM suspension system to date. Engineered for use with 20" or larger diameter rims, Pro Comps newest 6-inch lift kit provides the perfect height to clear 35" tall tires for all terrain use and enhances the aggressive appearance of GMs half-ton trucks.

New high strength extended steering knuckles retain factory steering geometry to make a Pro Comp-lifted GM 1500 4WD drive, steer and handle beyond expectation. Front lower crossmembers and a differential skid plate are precision-constructed from 3/16" thick steel plate to provide added strength to the chassis and protection for the front differential. Upper strut spacers retain the factory-tuned struts for same-as-factory ride quality. Rear lift blocks, U-bolts and Pro Runner rear shocks provide a level stance and maintain factory load capacity.

Features:
  • New high strength extended steering knuckles for use with 20"+ rims retain factory steering geometry and improve ride handling and steering
  • 3/16" thick steel front lower crossmembers and differential skid plate add strength to chassis and protection for front differential
  • Upper strut spacers retain the factory-tuned struts for same-as-factory ride quality
  • Rear lift blocks, U-bolts and ES9000 shocks provide level stance and maintain factory load capacity
  • Estimated 8-9 hours for professional installation
  • Alignment required after installation
  • Pro Comp Promise - Lifetime warranty and completely transferable
  • Lift Shield Warranty - 5 year / 60,000 mile powertrain warranty
Fitment:
  • GMC Sierra 1500 Denali 4WD 2019+
Notes:
  • Fits 19-Current GMC Denali with Segment-exclusive Adaptive Ride Control Only
  • Do not use on the following models:
    • Vehicles equipped with factory base suspension packages Chevrolet Custom and LT Trail Boss models with 2-inch factory suspension lift
    • GMC AT4 with 2-inch factory installed suspension lift
  • Images are for marketong purposes only, actual product may vary.

Other Part Numbers:
Pro Comp #EXPK1175E

Proposition 65

WARNING: Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov

Pro Comp Banner

Who is Pro Comp?

Pro Comp is an aftermarket company that was established back in 1992. They are known for manufacturing high-quality products that suit both daily drivers and offroad enthusiasts. Initially, they specialize in suspension parts and have been considered the leading expert in this field. Today, Pro comp is one of the most sought-after brands in the market when it comes to performance parts.

A Wide Array Of Performance Parts

The company offers a variety of parts ranging from suspensions, wheels, shocks, and other offroading components. They now also offer lights, leveling kits adding to their increasing list of parts. In 1998, Pro Comp decided to venture into making tires and has since become a major key player in the tire industry.

A Brand You Can Depend On

Pro Comp manufactures all of its products having reliability in mind. As they have products designed for offroad use, it is a must that everything should withstand extreme conditions that are usually encountered during offroading. The company utilizes state-of-the-art equipment that helps them create innovative products that meet their customers' expectations.

Purchase Pro Comp Product At Vivid Racing

If you are in search of a high-quality product that is dependable and reliable, then Pro Comp is the right product for you. They have been providing their customers with top-notched products for more than 20 years and have gained the trust of many enthusiasts worldwide. To know more about Pro Comp, visit Vivid Racing and check out their list of products that would fit your need.



 





At Pro Comp, we know you have many choices when selecting products to personalize your vehicle. You should demand nothing but the highest quality available and have total confidence that the products you selected are the best in the industry. It is for these reasons that Pro Comp Suspension products are backed by the best warranty in the industry...the Pro Comp Promise! Pro Comp promises that its products will last a lifetime or we will replace it free of charge. It's that simple! Because of our commitment to quality and manufacturing excellence, we are able to stand behind our products. FOREVER. It is Pro Comp's Promise that if one of our suspension products breaks not due to misuse, neglect or vandalism, we will replace it. WHETHER YOU ARE THE ORIGINAL PURCHASER OR NOT, you can be assured that we will make it right. The Pro Comp Promise covers all suspension products including shocks and steering stabilizers. Buy Pro Comp Suspension today and enjoy it for the rest of your life!

PRO COMP XTREME ALLOY (PXA) AND STEEL (PCW) LIMITED WHEEL WARRANTY All Pro Comp Xtreme Alloy (PXA) and Steel (PCW) wheels come with a limited warranty to cover manufacturing defects in material and workmanship under normal and intended use. Intended use is specified as normal on-road use, and not racing or off-road use. This warranty is extended to the original retail purchaser of the product only and is non-transferrable.

ALL ALLOY (PXA) WHEELS ARE COVERED BY A LIFETIME STRUCTURAL WARRANTY (WITH INTENDED ON-ROAD USE)
  • Xtreme Alloy (PXA) Finish Warranty
  • All powder coated wheels (gloss, flat and matte black) carry a 2-year limited warranty
  • All chrome and PVD finish wheels carry a 2-year limited warranty
NO FINISH WARRANTY ON ALL POLISHED WHEELS STEEL (PCW) FINISH WARRANTY
  • All Steel (PCW) wheels carry a 2-year limited warranty.
You're seeing this because you're logged into an employee account or you're accessing the site through an internal IP address. This information is not normally visible.
Things
Sale price None
Wholesale price CALL
Shipping Weight: 285.84
Length: 48
Width: 24
Height: 23
Product Added At Saturday 27 July, 2019
Product Modified At Friday 11 April, 2025
Imported By EPICF
Last Edited By Rob@vividracing.com
View In Admin
Vendors
Some placeholder content for the collapse component. This panel is hidden by default but revealed when the user activates the relevant trigger.
Vendor Inv Cost Retail Jobber MAP Core Updated
Meyer Distributing $1,029.16 $2,346.80 $2,346.80 $2,346.80 ? 2025-04-11 17:56:01


Check out these other great products