Radium Engineering Fuel Hanger Feed Kit for Nissan GT-R (2009-2020)

If you're a proud owner of a Nissan GT-R from 2009 to 2020, you're probably always on the lookout for ways to enhance your ride. The Radium Engineering Fuel Hanger Feed Kit is designed specifically for your vehicle, completely replacing the factory in-tank fuel pump unit. This innovative kit allows you to install up to three aftermarket fuel pumps (both brushed and brushless) that will keep your engine fed with the fuel it needs, no matter how aggressive your driving style gets.

Easy Installation

One of the best parts? You won’t need to make any permanent modifications to your vehicle during the installation process. The pumps are securely housed in a robust aluminum collector box that stays full during operation, ensuring you won’t experience fuel starvation even when pushing your GT-R to its limits.

Key Features

• Drop-In OEM Replacement
• Supports 1, 2, or 3 Pumps
• Fuel Starvation Protection
• Integrated 1-Way Fill Valve
• High Current Electrical Hardware
• Compatible with Various Pumps
• Anodized Aluminum Construction
• -10AN ORB Threaded Outlet Port
• -8AN ORB Threaded Return Port
• 6-Hole Fuel Return Diverter
• Fuel Resistant Tubing and Wiring
• OEM Hard Line Compatible
• Stainless Steel Hardware
• Gasoline, Methanol, and Ethanol Compliant

Fuel Starvation Prevention

The GT-R's unique saddle bag-style fuel tank utilizes two OEM venturi jet pumps that draw fuel from both sides and direct it to the OEM pump bucket. However, when you upgrade your fuel pumps, these venturi jet pumps can become a bottleneck, increasing fuel pressure and affecting regulator performance. Radium Engineering has cleverly reconfigured the plumbing to maintain the venturi jet pumps' functionality without compromising the return fuel flow from the regulator. This means you can upgrade your pumps without worrying about fuel pressure issues.

Important Notes

• Depending on fuel pressure, the venturi jet pumps will consume between 15-45 LPH. Keep this in mind when sizing your fuel pumps.
• If maintaining steady fuel pressure after shutting down the engine is crucial, consider installing a check valve in your fuel system.

Plumbing Made Simple

The standard fuel hanger kit includes low-profile swiveling adapters that convert to 6AN male fittings, along with short PTFE hoses and adapters for easy connection to the OEM fuel piping. If you need additional adapter fittings, those are available separately.

Filtration System

The kit uses sock filters on all fuel pump inlets. Since the Radium fuel hanger eliminates the non-serviceable post-pump filter, you’ll need to install an aftermarket filter downstream to keep your fuel clean.

Pump Compatibility

Traditional Brushed Fuel Pumps

• Radium Engineering offers this fuel pump hanger system pre-assembled with dual or triple AEM 50-1200 or Walbro GSS342 (255lph) pumps.
• You can also opt for a version with "no pumps included," allowing you to provide your own pumps and complete the assembly yourself.
• Other brands of pumps may be used, provided they match the fitment, form factor, and electrical connections of the Walbro/AEM pumps.

Note: The larger Walbro E85 pumps (F90000267/274/285/295) are not compatible with this kit.

Brushless Fuel Pump Systems

If your GT-R demands high fuel flow, consider a brushless fuel pump system. This Radium in-tank hanger system is compatible with up to three Ti Automotive E5LM brushless fuel pumps.

Configuration Options

When selecting the option with "Pumps Included," you'll receive a kit that comes partially assembled. The assembly will be completed during installation. If you choose "Pumps Not Included," the kit will still be partially assembled, providing enough components for up to three fuel pumps.

What's Included

• Fuel Filter (-03 Stainless, -05 Microglass)
• 10AN ORB to 10AN Male Low Profile Fitting
• 10AN to 6AN Y-Adapter Fittings (x3)
• Fuel Line Retaining Mounts (x5)
• R35 Filter Heat Shield Bracket
• 60mm 2-Piece Filter Clamp
• 6AN PTFE Fuel Hoses (x4)
• Stainless Steel Hardware

This fuel hanger feed kit is designed for left-hand drive (LHD) vehicles only. If you're installing a Radium in-tank fuel hanger with high-flow aftermarket pumps, keep in mind that the stock R35 fuel lines may not suffice. The fuel hanger feed kits come with everything you need to connect the Radium fuel hangers directly to Radium fuel rails, including new PTFE feed lines and reusing the factory feed line as the return for the regulator.

With this kit, you'll be well-equipped to take your GT-R's fueling system to the next level, ensuring you have the performance you crave on the road or track!