.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear 
On hot days, a quick twist of the ergonomic handle opens the windshield smoothly and holds it in the fully open and up position thanks to the two gas-filled struts. Closing is as easy as pulling the windshield back down-the latching mechanisms on the lower corners engage and keep the window closed. Our low-effort, single point release system utilizes 3/4" round tubing and glass filled nylon mounts, creating a less distracting and more elegant profile along the lower edge of the windshield when compared to similar stamped steel systems.
For Cooler Rides
For cooler rides, keep the windshield closed and utilize the Versa-Vents. The dual vent system is designed to add independent driver and passenger ventilation and anti-fogging features to the windshields. Now featuring a tinted, see through design, the innovative windshield vents gather air off the hood and re-directs the air to the inside of the vehicle-as much or as little as either the driver or passenger desires. The easy to use louver now includes detents for quickly finding the closed, defog, and opened positions.
Spherical Ball Rod Ends
Spherical ball rod ends are utilized as self-aligning hinges along the top of the windshield, allowing for the windshield to pivot freely throughout its range of motion and minimize any binding that may occur. The center retainer and rub plate act as an upper hinge point and helps minimize oscillation when riding with the windshield in the opened position.
Additional Features
The one-piece, full perimeter gasket is specifically designed for the Can-Am Defender. Featuring fully welded seams and molded corners, the gasket creates a weather tight seal and is designed to fit within the channels of the Pro-Fit extruded cage. And, foul weather won't cause issues with the vents as well. The design of the scoop and the gasket between it and the windshield keeps precipitation out while still allowing airflow in-as much or as little as either the driver or passenger desires.
Windshield Features:
- 0.220" 2-Sided Scratch Resistant Hard Coated Polycarbonate-Maximize visibility while minimizing UV and scratch damage to the windshield
- Toolless Mounting Clamps-Quickly snap on or off the cage and convert your UTV in less than a minute
- Completely Assembled-Windshield comes pre-assembled with gasket and clamps-take it out of the box and put it on your machine
- Automotive Style Gasket-Creates a weather tight seal and protect your body plastics
- Seizmik Compatible-Works with Seizmik mirrors and framed door kits
- OEM Compatible-Works with most OEM roofs and cab system components
- Trailerable-Up to 65mph when properly prepared
- Single Point Release System-Opens with a quick, low-effort twist of the handle
- Latching Mechanism-Windshield closes easily and latches shut with minimal force
- Spherical Ball Rod Ends-Utilized as self-aligning hinges allowing for a smooth range of motion with less binding
- Center Retainer and Rub Plate-Serves as a upper hinge point and helps minimize oscillation when riding with the windshield in the opened position
- Gas-Filled Struts-Smoothly opens and closes the windshield and keeps the windshield in the fully opened position
- Ergonomic Handle-For an easy grip with or without gloves
- Less Visual Distraction-3/4" round tubing paired with glass filled nylon mounts creates a slimmer profile than similar stamped steel systems
- 2 Tinted Polycarbonate Vents-Made of durable and impact resistant polycarbonate
- Gasket Sealed Components-For protection against wind and water intrusion
- Defog Mode-Incoming air can be directed at the inside window surface to help prevent fogging
- Fully Adjustable Air Flow-Easy-to-use louver with detents makes changing the airflow through your vents simple
- Tinted Design-Allows visibility through the vents
Fitments:
- Can-Am Defender
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
Seizmik is not your typical aftermarket shop. They specialize in producing parts and accessories for UTVs. Unlike with other companies who turn UTVs into a racer or rock crawling machines, the company focuses on creating accessories that would help improve the vehicle and make their work more fun. Today their products can be found in over 5000 independent dealerships.
Not Your Typical Small CompanySeizmik may be a small company compared to other big brands out there but it doesn’t mean they lack quality and craftsmanship. The company has been there when the trend for upgrading UTVs are just up and coming. Using their experience, they were able to produce products that are useful, durable, and affordable. Due to the quality of their product, they have been chosen as an Original Equipment supplier for some UTV companies and have even partaken in design in some of their vehicles.
Purpose Driven DesignUTVs are primarily designed for hunting, work, or hauling families in the outdoors. This is what Seizmik is focusing at. They wanted to create products that are meant for UTV owners who just wanted to improve their UTV in terms of its functionality. No fuzz, no frills just meant for business.
Purchase Seizmik Products at Vivid RacingIf you are the kind of person that just wanted an improvement in their UTV but not after the fancy aftermarket parts available in the market, then Seizmik is the right brand for you. Designed for those who prefer durability over speed they are a brand UTV owners can trust. Visit Vivid Racing and see the list of their product that would fit your specific needs.
In addition to our regular warranty on all our products, we also offer a 100% Lifetime Warranty on all our mirrors, regardless of how the mirror was damaged.
| Sale price | None |
| Wholesale price | $582.32 |
| Shipping |
Weight: 24.00 Length: 32 Width: 52 Height: 5 |
| Product Added At | Tuesday 02 July, 2024 |
| Product Modified At | Wednesday 28 May, 2025 |
| Imported By | ETLOverride |
| Last Edited By | kathi@vividracing.com |
| View In Admin |
| Carb Approved | Yes |
|---|---|
| Carb Number | - |
| Epa Status | N/A |
| Prop65 | Unknown |
| Carb Required | - |
| Vendor | Inv | Cost | Retail | Jobber | MAP | Core | Updated | |||
|---|---|---|---|---|---|---|---|---|---|---|
| High Lifter Products | $493.49 | $704.99 | ? | ? | ? | 2025-05-28 14:50:25 |
