See all Interior products
Product thumb
sPOD HD BantamX Vehicle Kit Toyota Tundra 2022-2024
$1054.95

sPOD HD BantamX Vehicle Kit Toyota Tundra 2022-2024 for 2022-2024 Toyota Tundra 870090 | Vivid Racing

sPOD BantamX HD vehicle-specific kit for Toyota Tundra (22-on) has been designed specifically to integrate the sPOD HD panel into your cabin seamlessly while providing a safe place to access all your controls.

Designed to replace the in-cab sunglass holder, our plate has been specifically designed at the perfect angle to access switches easily.

The BantamX will save hours of wiring and installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12/24VDC accessories. Due to the small footprint of the BantamX, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle's electrical system. It's the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.

Features:
  • Fully programmable, digital controlled system
  • 8 circuits rated at 30 amps at 12.5 VDC per circuit
  • 16-position terminal block (easily attach accessories)
  • 2 controller ports (RJ45) for Ethernet cables
  • Integrated low voltage cutoff (LVCO) battery protection w/ optional override
  • One ATM mini-style fuse for LVCO protection and reset
  • Failsafe self-healing fault protection system (from 1.5 to 30amps)
  • Current-sensing MOSFETs controlled by a microprocessor (no fuses and relays)
  • 100amp fuse
  • Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket
  • Operates on 12VDC or 24VDC
  • 8-position input terminal block for controlling outputs
  • Built-in Bluetooth capabilities for remote control
  • Protection against: overheating, over-current, shorts, reverse polarity and field collapse
  • Ignition control and safety lock-out for switches 1 and 2 (optional)
  • On-demand wireless software updates/upgrades
Hardware:
  • Powder coated steel base w/ built in hardware
  • Silicone gasket for weatherproofing
  • Simple, thumb screw fastening aluminum lid with convenient silkscreened outlines for supplied legend placement
  • Universal and vehicle specific mounting options
  • Robust insulated base and cover
FEATURES AVAILABLE THROUGH sPOD MOBILE APP (free):Each switch can be programmed for:
  • Dimming
  • Strobe
  • Flash
  • Momentary
  • Switch Linking
  • On Road and Off Road mode of operation
The following features are only available through the purchase of our Pro-Series mobile App:
  • Circuit timers
  • Switch lockout
  • Initial startup current for each circuit is raised to 65amps for 5 seconds
  • Program any circuit to be always on while still maintaining fault protection
  • Option to disable deep sleep mode
  • Selectable auto restart after circuit shuts down from over current/short
  • Programmable Current Limiting (in 2amp increments up to 30amps)
  • Selectable auto restart for current limiting shut down
  • Selectable Latch or Momentary actions for inputs
  • Programmable ignition control for all 8 circuits
  • Variable strobe function to create custom flash/strobe patterns
EXTERNAL CONTROLLER OPTIONS: (not included with system and can only be used in conjunction with an sPOD controller)
  • Third party switches
  • Computers
  • Arduino
  • Raspberry Pi
  • Alpine Audio systems KAC-001 head unit controller
  • Sensors, thermostats, pressure switches, fan controllers and more
HD CONTROL PANEL:
  • Encased in an aluminum billet machined housing, powder coated black, utilizing tactile switches encapsulated in silicone.
  • Silicone Buttons with positive touch feedback.
  • Panel is designed to withstand the harshest environments with all weather conditions considered.
  • Compact in size: 2-7/8W x 4-7/8L x 1/2 Thick (smaller than an iPhone).
  • Universal back with two pressed-in 1/4-20 studs x 5/8 inches long for flat mounting.
  • Standard universal articulating mount for a multitude of mounting options.
  • One standard RJ45 jack on the back for communication cable between HD panel and the BantamX. (HD comes with a 10 foot CAT-6 Ethernet cable)
  • HD can be located up to 25 feet from the Source using a standard CAT-6 Ethernet cable.
  • Built-in Bluetooth LE allows you to program and control our system with iPhones, iPad, iPad Mini using the free sPOD app.
  • Three levels of secured or open Bluetooth pairing/connectivity.
  • Each switch is programmable for dimming, flash, momentary, strobe, and switch linking (program any switch to be a master to control other switches)
  • All 8 switches are backlit.
  • Adjustable timer to turn backlight off and a simple touch on any switch to reactivate.
  • Quickly turn backlight off by holding 2 designated buttons.
  • RGB backlight color and intensity can be changed to any color to match vehicle interior dash lighting.
  • Panel lock-out feature for safety and security.
  • Legends can be applied (comes standard with one sheet of 72 legends).
  • Each switch has 3 status lights: Red (left) = On, White (center) = Flash/Strobe active, Blue (right) = Active visual feedback when button is pushed
  • Status lights can be dimmed.
  • Additional HD smart controller can be added for different locations.
  • HD can run in conjunction with our Touchscreen, Bluetooth and 8 Switch panel.
Bluetooth Requirements:
  • Access to iTunes or Google Play Store to download the sPOD app
  • Bluetooth 4.0 compatible
  • Compatible with Android devices running 8.0 Oreo (API 26) or later
  • Compatible with iOS 11 or newer, iPhone 7s or newer, iPad 2 or newer, iPad mini
  • Must have existing sPOD system
  • The primary reason for the Bluetooth integrated into the HD panel is for programming purposes, and not for remote control due to the limited range. HD housings are precision-machined billet aluminum which contributes to the distance limitations. Ranges may vary from 5 feet up to 15 feet depending on the location of the HD, the surroundings, phone type, phone cover, and many other variables.
Fitment:
  • Toyota Tundra 2022-2024
Proposition 65

WARNING: Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov

sPOD Banner

Who is sPOD?

sPOD is an aftermarket company that was established in 2005. The company specializes in manufacturing precision power distribution systems used for various offroad vehicles. They are not limited to doing products on these vehicles as they also create parts for agricultural equipment, race vehicles, utility vehicles, and any vehicle platform that uses either a 12-volt or 24-volt battery.

Made In The USA

sPOD is proud that all of its components are made in the US. The company uses only the finest material that would be able to withstand the harshest conditions. Having their products made stateside helps the company maintain a high-quality standard and gives their customers affordable products and is the best value for their money.

High Tech Gadgetry

Technology has come along way since the time the very first vehicle is made. sPOD has taken advantage of this by applying technology to create a product that would give total control to their vehicle. sPOD incorporated touchscreen technology to help operate the electrical system of the vehicles. This adds a modern feel to the vehicle and eliminates the need for multiple switches best for those who wanted a cleaner look on their rig.

Purchase sPOD Products at Vivid Racing

If you are searching for a product that would help you organize your vehicle electrical system to keep everything tidy and safe, then sPOD is the brand for you. Their products are proven by various racers and enthusiasts alike and are guaranteed to perform in extreme conditions. Visit Vivid Racing and check out their list of products that would fit your specific needs.




WARRANTY AND REPAIR POLICY

Precision Designs LLC dba sPOD offers a non-transferable 1-year limited warranty on mechanical components and a 90-day limited warranty on electronic parts and components from manufacturers defects from the date of purchase. sPOD will repair or replace items in question and return them to Buyer at no charge. If the identical product is no longer available, sPOD will replace with a similar product of equal value. sPOD will not be responsible for any indirect or consequential damages in connection with defective merchandise.

Exclusions:

Products that have been subjected to abuse, misuse, accident, alteration, modification, improper installation, tampering, or any use other than the product's designed purpose will void the warranty. The sPOD warranty excludes the following: Installation errors, abuse, misuse or crash damage, reverse polarity of battery cables, changing the 2 amp fuse for any other rated fuse, changing the 5 amp fuse for any other rated fuse, cutting off our connectors, splicing into our wires/harnesses, attaching anything other than our battery cables to our positive and negative terminal studs on our Source board, changing our supplied switches (switch body), removing the actuators without using our specific actuator removal tool. This warranty shall be automatically voided if the items sent for warranty replacement are modified in any way or were not used as intended or applicable. Additionally, this warranty excludes normal wear and tear. NOTE: Any or all aftermarket brake controllers, hi-amp solenoids or any hi-amp relay that is attached to the same positive battery post will cause irreversible damage to the sPOD system. This will void all warranties. This warranty shall be automatically voided if the items sent for warranty replacement are returned with water/liquid/chemical damage to any electrical component.

The buyer MUST provide a copy of the original invoice. Shipping responsibilities and/or charges will be determined once a claim has been opened. sPOD systems will be repaired or replaced at manufacturer's discretion. This warranty does not cover miscellaneous expenses, including, but not limited to, outside labor costs incurred for the installation, removal, replacement, and repair or troubleshooting. Please contact sPOD to assist with troubleshooting prior to uninstalling your entire system as the solution may not require that the system be removed.

All claims must be made in writing by mail or e-mail directly to sPOD:

By Mail: Precision Designs LLC dba sPOD
28910 Avenue Penn, Unit 201
Valencia, CA 91355

By E-mail: Sales@4x4s-POD.com

You're seeing this because you're logged into an employee account or you're accessing the site through an internal IP address. This information is not normally visible.
Things
Sale price None
Wholesale price $1,058.12
Shipping Weight: 5.00
Length: 13
Width: 10
Height: 10
Product Added At Friday 02 June, 2023
Product Modified At Thursday 24 October, 2024
Imported By ETLOverride
Last Edited By kathi@vividracing.com
View In Admin
Vendors
Some placeholder content for the collapse component. This panel is hidden by default but revealed when the user activates the relevant trigger.
Vendor Inv Cost Retail Jobber MAP Core Updated
sPOD $896.71 $1,054.95 ? $1,054.95 ? 2024-10-24 10:15:04


Check out these other great products