
If you're looking to amp up your VW MK6 or Audi 8U 2.0T TSI, let me tell you about the IE ECU Tune. You can do it right in your driveway, and trust me, it’s a game changer. This isn’t just another chip; it’s a deep dive into your engine’s potential without sacrificing the reliability and comfort you expect from your ride. Seriously, this tune takes your peppy little 2.0T and transforms it into something that’ll put a smile on your face every time you hit the gas.
The factory ECU is a pretty smart piece of tech, but it doesn’t always tap into the full power of your engine’especially if you've added some aftermarket goodies like a cold air intake or a new downpipe. That’s where IE comes in. They’ve spent countless hours on the dyno and out on the streets, tweaking and refining their tunes to get the most out of your setup. We’re talking about a tune that’s been crafted with precision to give you that extra kick while keeping everything running smoothly.
What You Can Expect:
- Boost your horsepower up to 281 with the right hardware upgrades.
- Tailored performance calibration for when you throw on a downpipe.
- Works with both 91 and 93 octane fuels’flexibility is key.
- Rev limit? Raised to a thrilling 7000 RPM.
- Say goodbye to speed limiters; it’s all about freedom on the road.
- Want some extra flair? There's an optional exhaust crackle feature.
- Just a heads up: you’ll need a downpipe upgrade and the IE DSG Tune to really get the most out of this.
- Highly recommended to pair with the IE FDS Intercooler for optimal performance.
- Manual transmission folks, you’ll want to upgrade your clutch.
- All of this while keeping safety protocols intact’your engine’s longevity is still a priority.
- Engineered to perform no matter the climate or elevation.
- Don’t forget, you’ll need the IE POWERlink Flash Tool and a Windows device to get started.
Fitments:
- VW GTI 2010-2014 (MK6) 2.0T TSI EA888 Gen 1/2
- VW GTI 2009 Only (MK5) 2.0T TSI EA888 Gen 1/2
- VW Jetta 2011-early 2013 (MK6) 2.0T TSI EA888 Gen 1/2
- VW GLI 2011 - early 2013 (MK6) 2.0T TSI EA888 Gen 1/2
- VW CC 2009-2017 (3C) 2.0T TSI EA888 Gen 1/2
- VW Passat 2006-2010 (B6) 2.0T TSI EA888 Gen 1/2
- VW Tiguan 2009-2017 (5N) 2.0T TSI EA888 Gen 1/2
- AUDI A3 2008-2013 (8P) 2.0T TSI EA888 Gen 1/2
- AUDI Q3 2015-2018 (8U) 2.0T TSI EA888 Gen 1/2
Important Notes:
- This tune is specifically for the second generation 2.0T TSI (timing chain driven) EA888 Gen 1 & 2 engines. If you’ve got an early 2.0T FSI (timing belt driven) EA113, that’s a different story.
- Make sure you’re not rocking an EA888 Gen 3 engine if you’re looking to order this tune; it won’t work with those models.
- You’ll need a laptop or tablet with Wi-Fi and a USB port running Windows 7 or higher’make sure it’s got some decent specs too.
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
Integrated Engineering was founded in 2007 in Salt Lake City, Utah. It was started by two brothers Peter and David Blais. The two shared the same passion for racing, and this has jumpstarted the two to create Integrated Engineering.
The company specializes in manufacturing performance products such as rods, camshafts, valve trains, and Billett accessories. Today, they have become a household name when it comes to performance.
German Car ExpertsIntegrated Engineering focuses on producing performance products for Audi and VWs. As the experts in these platforms, they are able to pinpoint exactly what parts need to be improved to bring out the best in those vehicles. The company considers not only the performance gain but its reliability as well. Their goal is to turn these vehicles into a better performing machine without compromising its reliability.
Attention to Detail is the KeyTo create top quality products, the company carefully studies each design detail using specialized software. This enables them to fine-tune the design before it goes to actual manufacturing. They first test their design in ABS plastic to ensure that all measurements are accurate and on the spot. Once everything has been checked, their performance products are then tested in their in-house engine and chassis dyno machine for long hours to test its performance and reliability.
This attention to detail has enabled their parts to perform in extreme conditions and withstand the punishment usually endured during high-performance applications.
Purchase Integrated Engineering Products at Vivid RacingIf you want to improve the way your Audi or VW performs, then Integrated Engineering has got you covered. Their expertise in these platforms has made them the go-to brand when it comes to performance, and it has gained them the trust of many enthusiasts everywhere. Visit Vivid Racing and see their list of products that would fit your specific needs.
Sale price | None |
Wholesale price | $441.62 |
Shipping |
Weight: 1.00 Length: ? Width: ? Height: ? |
Product Added At | Wednesday 07 October, 2020 |
Product Modified At | Wednesday 18 June, 2025 |
Imported By | ETLOverride |
Last Edited By | daveabalosgomez@gmail.com |
View In Admin |
Vendor | Inv | Cost | Retail | Jobber | MAP | Core | Updated | |||
---|---|---|---|---|---|---|---|---|---|---|
Integrated Engineering | $374.25 | $499.00 | ? | $499.00 | ? | 2025-06-18 21:58:54 |
Check out these other great products
