.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear 
Steeda Cold Air Intake Ford Mustang GT500 2010-2012 for 2010-2012 Ford Mustang GT500 555-3165 | Vivid Racing
We have taken that a step further with our new ProFlow Cold Air Intake for the 2010 and Up GT500. Designed, tested, and assembled all in-house. This kit completely replaces the factory intake assembly. This kit is specifically designed to utilize the factory cold air feed from the grille and incorporates a serviceable high flow air filter, an injection molded velocity stack, black powder-coated heat shield, and our high flow ProFlow intake tube.
With a large 114mm mass air flow pipe we achieved a substantial increase in air flow at all engine rpm's, not just at redline. The heat shield seals to the hood liner and also keeps the factory cold air feed duct from taking in hot air from the engine bay for maximum power.
This GT500 cold air intake is so effective at improving airflow into the 5.4L supercharged engine that a performance tune is required for maximum performance and drivability. This intake will not work with the factory ECU calibration.
In an effort to maximize performance and provide our customers with only the very best products we have partnered with the leader in automotive tuning - SCT Performance.
Combined with the required custom tune using an SCT X4 Flash programming device we have achieved power increases of up to 36hp and 39ft/lbs of torque!
Breaking down the powerband, peak to peak gains of 32 horsepower were achieved, with point to point max gains of 36 horsepower. Peak to peak torque gains were 32ft/lbs of torque, with point to point max gains of as much as 39ft/lbs!
Power gains were achieved over the entire RPM range. More power and improved throttle response is available everywhere at any time when you need it.
If you already own a tuning device you can purchase the cold air intake by itself here, or for a complete package with the required custom tuning check out our Power Packs.
Our easy to install kit comes with premium hardware, silicone sleeves, and installation instructions.
Features:
- Does not get heat soaked like factory air box
- Cools to ambient temperature range significantly faster than the stock unit while producing more power
- Utilizes the factory cold air feed duct from the grille for low air charge temperatures
- Beautiful gloss black powder-coated heat shield
- ProFlow roto molded intake tube offers minimal heat soak maintaining cool air charge temps
- Up to 36hp and 39ft/lbs of torque on an otherwise stock car
- Steeda has been building Cold Air Intakes for Ford performance vehicles longer than any other company!
- Installation Guide
- Ford Mustang GT500 2010-2012
- Not approved for sale in California or states that require a California E.O. #.This part has been designed and is intended for off-road application only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations.
- Federal and several state and provincial laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. Steeda Autosports assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer's modifications and/or use of Steeda products. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws.
- This limited warranty is the only express warranty applicable to Steeda Autosports products. Other rights may arise or vary from state to state in the United States. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
Steeda is an aftermarket company that specializes in manufacturing Ford Performance equipment. The company started back in 1988 and has exclusively committed itself to Ford Motor Company. Today, they have become one of the leading sources of high-performance parts of various Ford owners.
Ford Performance Parts ExpertsSteeda has a wide range of products with over 4000 items that range from shifters, cold air intakes, suspension parts, chassis components, induction systems, and more. They cater to practically all vehicles made by Ford such as the Fusion, Fiesta, Focus, F-150, and the Mustang.
Motorsport HeritageThe company has also played a big role in the development of the various Ford make race cars and has helped top racing teams set records and win championships. Using their experience on the track, they are able to gather data that help them develop innovative products for their customers.
Driven by PassionThe company is composed of fellow automotive enthusiasts that understand what it needs to help improve your vehicle. They have years of combined experience and are driven by their passion to develop products that the best in the market.
Purchase Steeda Products at Vivid RacingFord Motor Company is considered as the pioneer of the automotive industry and has produced some of the great cars in the market. But this has not stopped owners from modifying and upgrading their vehicles to further improve their performance. If you are in search of a high-quality product for your Ford, then Steeda is the right brand for you. To know more about Steeda, visit Vivid Racing and check out their list of products that would fit your specific needs.
| Sale price | None |
| Wholesale price | $322.14 |
| Shipping |
Weight: 11.00 Length: 18 Width: 15 Height: ? |
| Product Added At | Tuesday 15 June, 2021 |
| Product Modified At | Sunday 01 June, 2025 |
| Imported By | ETLOverride |
| Last Edited By | kroyrosales13@gmail.com |
| View In Admin |
| Carb Approved | No |
|---|---|
| Carb Number | - |
| Epa Status | - |
| Prop65 | - |
| Carb Required | - |
| Vendor | Inv | Cost | Retail | Jobber | MAP | Core | Updated | |||
|---|---|---|---|---|---|---|---|---|---|---|
| Steeda Autosports | $273.00 | $399.95 | ? | $399.95 | ? | 2025-06-01 20:22:32 |
