Benefits of Running the C5/C6 Set Up:
- Larger Rotors: The larger rotor absorbs and radiates more heat, the C5 rotor is 1" larger than the LS1 rotor and 2" larger than the LT1 rotor. The C6 rotor is 1/2" larger than C5.
- Corvette rotors are directional unlike the LT1 and LS1 set ups. Corvette rotors feature fins designed to advance air flow allowing better cooling.
- Many brake pad and rotor options are available for all types of driving.
- Unlike other brake set ups, Corvette components can be purchased at any parts store. This eliminates down time when an item may fail or require replacement.
- 1993 - 2002 Chevrolet Camaro
- 1993 - 2002 Pontiac Firebird
- Will NOT clear with the conversion kit, they may clear with the correct wheel spacers:
- Enkei Win- 17" x 9.5"
- 93-94 SLP Firehawk wheel- 17" x 9"
- Borbet Type T- 17" x 9.5"
- Forgeline RS Reverse Rim
- Torque Thrust II
- Konig Monsoon 17"
Note:
- To install brackets both LT1 and LS1 spindles require modifications. This simple modification can be done while the spindle is on the car and requires a small amount of cutting and grinding. LS1 models require less cutting than LT1 models. Instructions included.
- There are many rotor and brake pad setups available for the C5/C6 Corvette and various driving applications may require a different setup. Please note these are the adaptor brackets only and to complete installation you must purchase rotors, calipers, abutment brackets and pads separately. Each installation sheet is very detailed and will provide a list of items needed to perform and complete the installation.
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
UMI Performance is an aftermarket company that specializes in building high-quality suspension parts. But before they were known as a suspension manufacturer, they manufactured precision parts for major brands such as Corning Asahi, Sony, and Bell+Howell. They may have shifted industries, but their dedication to creating quality products has remained the same.
Quality Products Made In The USAAll of their products are made in-house, which allows them to control every aspect of their products. 100% made in the USA, they can maintain their high standards and create suspension parts that can tackle any street, whether it be the fast corners of a race track or the bumpy road to your grocery store.
Parts Bred From The RacetrackUMI Performance actively participates in various racing disciplines since most of their product engineers and sales team are racers. Because of this, they can test their products through real-life racing scenarios, which helps them gather data that can help improve their products.
Easy To Install PartsEach product is designed to replace factory-installed parts without any significant modification. It is carefully measured to ensure that it would fit perfectly into the vehicle and comes with a step-by-step instructional manual, giving their customers a hassle-free installation experience.
Purchase UMI Performance At Vivid RacingIf you are in the market for high-quality suspension parts for your vehicle, then look no further, as UMI is the brand for you. To know more about UMI, visit Vivid Racing and check out their list of products that fit your specific need.
This warranty is valid against defects in materials and workmanship for the two (2) year warranty period. It is not valid against defect resulting from, but not limited to:
- Misuse and/or abuse, neglect or accident.
Exceeding the item(s) design limits.
Improper installation.
Acts of God, including lightning, floods, earthquakes, fire or high winds.
Damage in handling, including damage encountered during shipment.
This warranty shall be considered void if the warranted product is in any way altered, adjusted, tampered with or defaced.
The two (2) year warranty does not apply to normal wear and tear (the gradual deterioration of an asset which results naturally from use and/or age, i.e. bearings, bushings, etc.).
Non UMI manufactured parts are not covered or valid under this UMI Performance warranty.
UMI Performance cannot guarantee compatibility or performance of its products with other components used in conjunction with UMI Performance products.
UMI Performance cannot assume responsibility for any damages to UMI Products nor for claims for personal injury or property damage resulting from the use of UMI Performance's products or the improper operation thereof or consequential damages arising from the products or use of the products
.UMI Performance two (2) year warranty excludes incidental charges incurred by the end user in the event of breakage (towing, labor, installation, etc.). By their very nature, competition suspension parts are continuously expected to exceed to their limits (either by race or road use). UMI suspension components are designed to withstand intense race conditions, although it is impossible to control the quality of installation or the varying conditions in which they are used.
This warranty supersedes all other warranties and may only be modified by statement in writing, signed by UMI Performance owners/principals.
All Warranties implied by law, including the warranties of merchantability and fitness for a particular purpose, are hereby limited to the warranty period herein and shall expire at the end of such period.
Sale price | None |
Wholesale price | $245.43 |
Shipping |
Weight: 10.00 Length: 8 Width: 5 Height: 8 |
Product Added At | Thursday 07 November, 2019 |
Product Modified At | Wednesday 28 May, 2025 |
Imported By | ETLOverride |
Last Edited By | kathi@vividracing.com |
View In Admin |
Carb Approved | - |
---|---|
Carb Number | - |
Epa Status | N/A |
Prop65 | Yes |
Carb Required | - |
Vendor | Inv | Cost | Retail | Jobber | MAP | Core | Updated | |||
---|---|---|---|---|---|---|---|---|---|---|
UMI Performance | $207.99 | $259.99 | ? | $259.99 | ? | 2025-05-28 12:43:52 |
Check out these other great products
